Technology
What is the range of Bluetooth® technology?
More than a kilometer. Less than a meter.
The effective, reliable range between Bluetooth devices is anywhere from more than a kilometer down to less than a meter.
Use the Bluetooth Range Estimator
What Determines Bluetooth Range?
The longer answer to the question about the range of Bluetooth® technology is it depends.
Unlike other wireless technologies, Bluetooth technology is designed to support a wide range of achievable ranges between two devices, providing developers tremendous flexibility to create wireless solutions that best meet the needs of their target use case.
Several key factors influence the effective range of a reliable Bluetooth connection, including the following:
Radio Spectrum
Radio spectrum stretches from 30 Hz to 300 GHz. The lower the frequency the longer the range. However, the lower the frequency the lower the data rate it can support. 
As a result, selecting a radio spectrum comes with tradeoffs between range and data rate.
Bluetooth® technology uses the 2.4 GHz ISM spectrum band (2400 to 2483.5 MHz), which enables a good balance between range and throughput. In addition, the 2.4 GHz band is available worldwide, making it a true standard for low-power wireless connectivity.
PHY
The physical layer (PHY) of a wireless technology defines the modulation scheme and other techniques it uses to send data over a specific radio frequency (RF) band. This includes the number of channels available, how effectively those channels are utilized, the use of error correction, the guards in place to counter interference, and much more. If you compare RF communication to verbal communication, you can think of the PHY as defining the speed and clarity of your speech. Both impact the range at which you can be heard.
Bluetooth® technology provides multiple PHY options, each with different characteristics that determine effective range and data rates.
Receiver Sensitivity
Receiver sensitivity is the measure of the minimum signal strength a receiver can interpret. In other words, it’s the lowest power level at which the receiver can detect a radio signal, maintain a connection, and still demodulate data. Think of receiver sensitivity as a measure of how well you can hear or the quietest sound you can hear and understand.
Bluetooth® technology specifies that devices must be able to achieve a minimum receiver sensitivity of -70 dBm to -82 dBm, depending on the PHY used. However, Bluetooth implementations typically achieve much higher receiver sensitivity levels. For example, average implementations of the Bluetooth LE 125K (Coded) PHY are achieving a receiver sensitivity of -103 dBm.
Transmit Power
Choosing a transmit power level is a design tradeoff between range and power consumption. The higher the transmit power, the more likely the signal can be heard at longer distances and the longer the effective range. However, increasing the transmit power increases the power consumption of your device. Think of transmit power like the volume of your voice. 
The louder you speak, the farther away someone can hear you but the more energy it takes.
Bluetooth® technology supports transmit powers from -20 dBm (0.01 mW) to +20 dBm (100 mW).
Antenna Gain
The antenna converts electrical energy from the transmitter into electromagnetic energy (or radio waves) and vice-versa for the receiver. Antenna location, package size, and design can greatly impact how effective the signal is transmitted and received. And types and sizes of antenna and their efficiency in converting electrical to electromagnetic energy and focusing the direction of the energy can vary greatly.
The effective antenna gain is relevant for both the transmitting and receiving antenna. The directional influence of an antenna is similar to speaking or listening through a cone to focus the energy of the sound.
Bluetooth® technology designers can choose to implement a variety of antenna options. Antenna design is as much an art as it is a science. Bluetooth devices typically achieve an antenna gain in the range of –10 dBi to +10 dBi.
Path Loss
Path loss is the reduction in signal strength that occurs as a radio wave propagates through the air. Path loss, or path attenuation, occurs naturally over distance and is impacted by the environment in which the signal is being transmitted. Obstacles between the transmitter and the receiver can deteriorate the signal.
Attenuators can be anything from humidity and precipitation, to walls, windows, and other obstacles made of glass, wood, metal, or concrete, including metal towers or panels that reflect and scatter radio waves. While radio waves can pass through objects, the amount of attenuation and effective path loss varies with the type and density of the obstruction. Think about when you are trying to hear someone in the next room and the difference between the volume and clarity of what you can hear if the wall that separates you is made of wood compared to concrete.
Related Resources
Using Bluetooth in Location Tracking Devices
Bluetooth ranging technology, which uses the distance between one or more devices through signal…
Bluetooth Development Training: Works With 2022
The role Bluetooth has played, and will continue to play, in theevolution of IoT…
Penn Waste Inc. Minimizes Machine Downtime And Improves Efficiency
Learn how Dodge Industrial partnered with Cassia Networks to help Penn Waste Inc. reduce…
Bluetooth Range and Reliability: Myth vs Fact
As Bluetooth is becoming more and more ubiquitous in smart homes, buildings, and factories,…
Advanced Bluetooth® Technology – Under the APIs
Bluetooth technology has changed enormously since its initial release about twenty years ago. Communication…
Researchers design Bluetooth enabled stethoscope with a 50-foot range to help healthcare practitioners stay safe
To protect both patients and practitioners, BYU nursing and technology professors collaborated to design…
Advanced Bluetooth for Android Developers
Android developers can take this guided tour of the most recent features and interesting…
Discussing Bluetooth Range
Watch Nordic address some of the most common myths concerning Bluetooth range, discuss the…
Four Approaches for Expanding the Range of Bluetooth
Bluetooth technology is seeing widespread adoption in IoT applications. However, these implementations often require…
5 Things You Don’t Know About Bluetooth Range
From frequency hopping to forward error correction, watch Mohammad Afaneh share some things you…
Disrupting the Restoration Industry with Bluetooth
When Steven Kramer became aware of how antiquated water restoration operations had become in…
Comparing RTLS infrastructure: Weighing Bluetooth and Competitors
Real-Time Location Solutions are adding more value for operators at a lower price point.…
A Conversation About Smart Buildings
From energy and urbanization to demographics and health, major forces transforming our society are…
Bluetooth Range Test from a Watch Tower
UnSeen Technologies uses Nordic Semiconductor and Texas Instruments chips to test Bluetooth long range…
The Role Of Bluetooth In Mobile Access Control
Gartner suggests that, by 2020, 20 percent of organizations will use mobile credentials for…
Texas Instruments Demos 1.5km Range with Bluetooth
In this video you will learn: The length of a transmission range that can…
Tested by Nordic: Bluetooth Long Range
The developer team at Nordic Semiconductor demystifies the long range capabilities of Bluetooth Low…
RuuviTag Takes Bluetooth Range Test to the Streets
RuuviTag takes their Bluetooth sensor beacon to the streets to test the limits with…
Long Range High-Quality Bluetooth Audio at L'Oreal Office
L’Oreal was looking for a new solution and wanted to test wireless Bluetooth headsets…
Stay in the Know
Keep up to date with the latest Bluetooth technology updates
