Bluetooth Blog
- October 17, 2019
- Jason Marcel
- Bluetooth Low Energy, Point-to-Point, Range
A fit-for-purpose solution, Bluetooth® technology allows developers to create wireless innovations that best meet the needs of their target use case. While the most well-known Bluetooth use cases, such as audio streaming and wearables,are built with short-range connectivity in mind, this is not because of an inherent limit to the effective range of the technology. Bluetooth has the flexibility to be as precise as less than a meter or to reliably connect devices more than a kilometer apart. When determining signal range and reliability at greater distances, several factors need to be considered.
Radio Spectrum
Radio spectrum stretches from 30 Hz to 300 GHz. The lower the frequency, the longer the range. However, the lower the frequency, the lower the data rate it can support. As a result, selecting a radio spectrum comes with tradeoffs between range and data rate.
Bluetooth® technology uses the 2.4 GHz ISM spectrum band (2400 to 2483.5 MHz), which enables a good balance between range and throughput. In addition, the 2.4 GHz band is available worldwide, making it a true standard for low-power wireless connectivity.
Transmit Power
Think of transmit power like the volume of your voice. The louder you speak, the farther away someone can hear you, but the more energy it takes.
Choosing a transmit power level is a design tradeoff between range and power consumption. The higher the transmit power, the more likely the signal can be heard at longer distances, and the longer the effective range. However, increasing the transmit power increases the power consumption of your device.
Bluetooth® technology supports transmit powers from -20 dBm (0.01 mW) to +20 dBm (100 mW).
Receiver Sensitivity
Bluetooth® technology specifies that devices must be able to achieve a minimum receiver sensitivity of -70 dBm to -82 dBm, depending on the PHY used. However, Bluetooth implementations typically achieve much higher receiver sensitivity levels of -95 dBm or better.
Think of receiver sensitivity as a measure of how well you can hear or the quietest sound you can hear and understand. Receiver sensitivity is the measure of the minimum signal strength a receiver can interpret. In other words, it’s the lowest power level at which the receiver can detect a radio signal, maintain a connection, and still demodulate data.
Other Factors
Learn more about other factors, such as path loss, antenna gain, and PHY, that play a key role in determining the effective range of a Bluetooth solution. And check out the Bluetooth range estimator to see how far Bluetooth® range can go for you.
FEATURED TOOL
The Bluetooth Range Estimator
Calculate the expected range between two Bluetooth devices.
TRY IT NOW
An Introduction to Bluetooth® Channel Sounding
Bluetooth® Channel Sounding is a new secure, fine-ranging feature that promises to enhance the…
Watch Now
Bluetooth® Core Specification v6.0 Feature Overview
Bluetooth® Core Specification version 6.0 includes several feature enhancements. This paper provides an overview…
Learn More
Bluetooth® Channel Sounding Communications Guide
This communications guide includes Bluetooth® Channel Sounding key messages and positioning details. This document…
Learn More
Coffee → Max Throughput → More Bluetooth® Testing
Recently, while sipping on our americanos and lattes, conversation moved to our series of…
Learn More
- SIG Member
Coded PHYs + Advertising Coding Selection = Superior Bluetooth® Range
Bluetooth® v5.0 introduced LE Coded PHYs to extend the original range of the 1M…
Learn More
- SIG Member
5.7 km of Bluetooth® Range
40 km from Irvine, California gets you to beautiful Newport Beach Pier, and 5.7…
Learn More
- SIG Member
Unveiling the Truth: Debunking Bluetooth’s Biggest Myth
Bluetooth Low Energy was designed to considerably reduce power consumption and cost while maintaining…
Learn More
- SIG Member
2300 Meters of Bluetooth Connectivity - Not so Short Range
The number of Bluetooth® devices and applications is constantly increasing. Applications such as warehouse…
Learn More
- SIG Member
Using Bluetooth in Location Tracking Devices
Bluetooth ranging technology, which uses the distance between one or more devices through signal…
- SIG Member
Bluetooth Development Training: Works With 2022
The role Bluetooth has played, and will continue to play, in theevolution of IoT…
- SIG Member
Penn Waste Inc. Minimizes Machine Downtime And Improves Efficiency
Learn how Dodge Industrial partnered with Cassia Networks to help Penn Waste Inc. reduce…
- SIG Member
10 Resources That Showcase the Range and Reliability of Bluetooth Technology
Despite the overwhelming adoption of Bluetooth® technology across a wide range of global solutions…
Read More
Bluetooth Range and Reliability: Myth vs Fact
For years, Bluetooth®technology enhanced the lives of millions of people around the world, becoming…
Read More
How Bluetooth Technology Enables Reliable, Long- Range Solutions
The success of Bluetooth® technology in the wireless communication industry is illustrated by its…
Read More
Advanced Bluetooth® Technology – Under the APIs
Bluetooth technology has changed enormously since its initial release about twenty years ago. Communication…
Watch Now
Disrupting the Restoration Industry with Bluetooth
When Steven Kramer became aware of how antiquated water restoration operations had become in…
Learn More
- SIG Member
Long Range High-Quality Bluetooth Audio at L'Oreal Office
L’Oreal was looking for a new solution and wanted to test wireless Bluetooth headsets…
- SIG Member