TLS 1.3 is the latest security protocol that improves upon TLS 1.2 in terms of security and performance. TLS 1.3 is still not widely used for all apps installed in Windows 10.
Click here to learn more about which TLS versions should be used when connecting to an ASUSTOR NAS.
Windows 11 has TLS 1.3 enabled by default, the settings are not required to change in Windows 11.
TLS 1.3 is not enabled in Windows 10 by default. If you are using network apps that require or support TLS 1.3, you should enable TLS 1.3 in Windows 10.
In Windows 10, click [Search] on the [Taskbar].
Enter [regedit] and then you will find [Registry Editor] here.
Click on [Open].
Enable TLS 1.3:
Find the following path in the left panel of the Registry Editor:
Double-click on [Enabled].
In the [Value data] field, change the value to [1] and click [OK].
Note: If you cannot find the above path in Windows 10, please right-click on the right panel according to this path, create [TLS 1.3] and [Client] key path in turn, and then create 2 DWORD (32-bit) values [DisabledByDefault] and [Enabled] with default value 0.
You can click here to download the Windows registration file to create the key path and default value, and then modify it. (MD5: b003f9e7fd0b825fafd02f915d7de0ca)
However, if some apps you are using in Windows 10 do not support TLS 1.3, the apps possibly do not work properly by TLS 1.3 is enabled, and you should disable TLS 1.3 in Windows 10.
Disable TLS 1.3:
Find the following path in the left panel of the Registry Editor:
Double-click on [Enabled].
In the [Value data] field, change the value to [0] and click [OK].
Troubleshooting Tip: how to enable TLS 1.3 in Windows 10
Configure it on the Internet Explorer. Open the 'Run' Windows by inputting 'Win + R' and type 'inetcpl.cpl' to execute 'Internet Properties'. Browse to the 'Advanced' section and check 'Use TLS 1.3 (experimental)' to enable TLS 1.3.
Troubleshooting Tip: how to enable TLS 1.3 in Windows 10
Configure it on the Internet Explorer. Open the 'Run' Windows by inputting 'Win + R' and type 'inetcpl.cpl' to execute 'Internet Properties'. Browse to the 'Advanced' section and check 'Use TLS 1.3 (experimental)' to enable TLS 1.3.
TLS 1.3 is not enabled in Windows 10 by default. If you are using network apps that require or support TLS 1.3, you should enable TLS 1.3 in Windows 10. In Windows 10, click [Search] on the [Taskbar].Enter [regedit] and then you will find [Registry Editor] here.
In a nutshell, TLS 1.3 is faster and more secure than TLS 1.2. One of the changes that makes TLS 1.3 faster is an update to the way a TLS handshake works: TLS handshakes in TLS 1.3 only require one round trip (or back-and-forth communication) instead of two, shortening the process by a few milliseconds.
If you want to enable it only for specific applications like IIS, RDP, PowerShell, etc, you can use the following registry keys: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.3\Client : for client applications.
To do this, open the command prompt by clicking the Windows start button, typing “cmd” and then pressing enter.Once the command prompt window is open, type “netsh trace show tls” and press enter. This will show you the TLS protocol version that is being used.
-Press the Windows key + R to start Run, type regedit, and press Enter or click OK. -If you can't find any of the keys or if their values are not correct, then TLS 1.2 is not enabled. I hope this information helps.
Step 1: Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols". Create a key named "TLS 1.1" with two DWORDs for both TLS 1.0 & 1.1: "DisabledByDefault=1" & "Enabled=0".
TLS 1.3 is not directly compatible with previous versions. Although TLS 1.3 can be implemented with a backward-compatibility mode, there are still several compatibility risks to consider when upgrading to TLS 1.3: TLS 1.3 uses a half-close policy, while TLS 1.2 and earlier use a duplex-close policy.
Disabling TLS 1.0 and TLS 1.1 on your server will protect your server and your clients from these vulnerabilities. However, if you have clients that support TLS 1.0 and/or TLS 1.1, but not TLS 1.2, then these clients will not be able to connect to your server if you disable TLS 1.0 and TLS 1.1.
The adoption of the Transport Layer Security (TLS) 1.3 creates a watershed moment for cybersecurity, revolutionizing encryption and data protection standards. TLS has been widely used to secure data end-to-end for many decades.
Step 1: Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols". Create a key named "TLS 1.1" with two DWORDs for both TLS 1.0 & 1.1: "DisabledByDefault=1" & "Enabled=0".
To disable TLS 1.3, open Chrome then types chrome://flags/#tls13-variant on the address bar. Locate TLS 1.3 then open the drop-down menu next to it. Disable it by setting it as 'Disabled. ' Relaunch your browser and try accessing the internet to see if the problem is solved.
Introduction: My name is Saturnina Altenwerth DVM, I am a witty, perfect, combative, beautiful, determined, fancy, determined person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.