W.e.f 01.07.2023, As per CCA Guidelines, Default PIN / Password of any USB Token must be changed before dsc download. So in this article we will check process for how to change USB Token default PIN / Password.
W.E.F 01.07.2023, DSC CAN NOT BE DOWNLOADED IN USB TOKEN WITH DEFAULT PASSWORD.
So, follow below steps to change TOKEN PIN / Password :-
The above process is for Fresh Unused HYP2003 USB Tokens:-
Open HYP2003 Token Manager from Windows Search Options. If you are unable to find HYP2003 Token Manager, First Download & Install HYP2003 Driver.
Step 2: Click on Login Button. Enter Default password i.e 12345678 & click on OK.
Step 3: Click on Change User PIN. In Window enter Old PIN means default password i.e 12345678 then enter new PIN of your choice like 54547766 or 87654321 etc and click on OK.
Step 4: Token PIN will be changed. Now download Digital Signature with New Password.
Step 2: Open WD Proxkey Tool, Click on Change User PIN. On right side, Enter Default User PIN i.e 12345678, then enter New User PIN as per your choice like 87654321 and click on OK.
2) To change token PIN, click on Change PIN tab, enter Existing PIN, New PIN, and Confirm New PIN, then click Change PIN. *The Change PIN button will not appear unless the PIN you entered is 8 – 12 digit and are the same for both New PIN and Confirm New PIN textbox.
Open the Safenet Authentication Client. In the SafeNet Authentication Client Tools window, click Change Token Password. On the Change Password Token page, in the Current Token Password box, type your existing password. In the New Token Password and Confirm Password boxes, create and confirm your new token password.
If you are unable to find WD Proxkey Tool, Download & Install Proxkey USB Token Driver. Step 2: Open WD Proxkey Tool, Click on Change User PIN. On right side, Enter Default User PIN i.e 12345678, then enter New User PIN as per your choice like 87654321 and click on OK.
There is only one instance of your Digital Signature Certificate (DSC), and the issued DSC can only be downloaded to a USB Token. USB Token drivers need to be installed on your PC/Laptop for using your DSC. Our tokens have an auto-run feature for installation and no CDs or further download is required.
A Digital Signature Token or USB Token is a password-protected physical device used to establish personal identity. It enables users to access the network without a password. It helps improve security by authenticating user access to the network.
A password reset disk is a file (named userkey. psw) that you create on a USB flash drive. This will allow you to reset your password on the lock screen when plugged into your Windows PC and will allow you to log into your system account again.
ePass 2003 Auto is USB crypto token with high performance smart card chip and CCID interface. This is a blank Plug and Play ePass 2003 Auto FIPS Level 3 Certified USB Token used for storing any kind of digital signature certificate (DSC).
Sadly, there is no way to recover the password used to protect your digital signature. You will need to delete your digital signature and load in a new one.
A Digital Signature Certificate (DSC) is a secure digital key that is issued by the Certifying Authorities (CA) for the purpose of validating and certifying the identity of the person holding this certificate. Digital Signatures make use of the public key encryptions to create the signatures.
Address: Apt. 536 6162 Reichel Greens, Port Zackaryside, CT 22682-9804
Phone: +9958384818317
Job: IT Representative
Hobby: Scrapbooking, Hiking, Hunting, Kite flying, Blacksmithing, Video gaming, Foraging
Introduction: My name is Jamar Nader, I am a fine, shiny, colorful, bright, nice, perfect, curious person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.