The FortiGate firewall must generate traffic log entries containing information to establish the source of the events, such as the source IP address at a minimum. (2024)

1. Click Log and Report.
2. Click Log Settings.
3. Click All for the Event Logging and Local Traffic Log options (for most verbose logging), or Click Customize and choose granular logging options to meet organization needs.
4. Scroll to UUIDs in Traffic Log and toggle Policy and Address buttons to enable.
5. Click Apply.

In addition to these log settings, configure individual firewall policies with the most suitable Logging Options.

1. Click Policy and Objects.
2. Click IPv4 or IPv6 Policy.
3. For each policy, configure Logging Options to log All Sessions (for most verbose logging).
4. Confirm each created Policy is Enabled.
5. Click OK.

or

1. Open a CLI console, via SSH or available from the GUI.
2. Run the following command:
# config log eventfilter
# set event enable
# set system enable
# set endpoint enable
# set user enable
# set security-rating enable
# end
# config firewall policy
# edit 0
# set srcintf {interface_name_1}
# set dstintf {interface_name_2}
# set srcaddr {address_a}
# set dstaddr {address_b}
# set schedule {always}
# set service {services required by site policy}
# set action {accept}
# set logtraffic enable
# next
# end

The {} indicate the object is defined by the organization policy.