Aquacheck Pro – 5 Way Test Strips
“If” “When” & “How” for Chlorine users.
Your AquaCheck Pro 5 Way Test Strips test for 5 different items:
- Total Chlorine
- Free Chlorine
- Bromine
- pH
- Alkalinity
For our Bromine users you can draw a line through the purple row to remind you that it is not relevant for you.
See Also
Salt and Drinking Water
| ITEM | IF LOW | IF HIGH |
Total Chlorine | No adjustment required. | If total chlorine is high but free chlorine is low, it is an indication that the hot tub requires a shock treatment. This can be done by adding your weekly dose of Amaze or Mineraluxe Oxygen. |
Free Chlorine | Add 2 tsp Chlorine Granules every 20 mins until desired result is achieved. | If a disc floater is in: remove it from the tub until levels come back into range. If a floater is not being used: open the cover and let the jets run for 20-40 mins. |
| pH | Always adjust alkalinity first. If pH is still low add 1 tbsp pH+ every 20 mins until desired result is achieved. | Always adjust alkalinity first. If pH is still high add 1 tbsp pH- every 20 mins until desired result is achieved. |
| Alkalinity | Add 1/4 cup of Alkalinity Plus. Check level after 20 mins, if still low add 2 tbsp every 20 mins until desired result is achieved. | Add 1 tbsp pH- every 20 mins until desired level is achieved. If extremely high due to using well or dugout water:bring in a sample to your water care specialist at the store and get a custom solution for dropping the levels faster using Acid Enhance. |
*This is a rough guide based on averages.*
For most accurate measurements, bring in your sample to Backyard Leisure for a custom computer analysis and treatment guide.
