I have a great trailer, but it feels a bit flexy, maybe even rickety . . . How can I strengthen a trailer frame? How can I stiffen it?
It is not uncommon to repurpose a trailer, or to find a reason for a trailer frame that needs new life. And, some trailers just feel a little rickety, so we can look at ways to stiffen and strengthen a trailer frame.
Where To Start?
First, make sure we are in the right place. There are two different needs for greater strength or stiffness. The most common is a trailer that is flexy, or feels a bit rickety. The other is to increase load capacity. Both are needs to strengthen a trailer frame, but the approaches are different.
- A trailer that feels flexy might be a frame that is repurposed, or a bolt together design that has seen tough miles. Or, it might be an inexpensive trailer that folds up. Whatever the source, it now feels under designed. In this article we will look at stiffening aspects to strengthen a trailer frame.
- A trailer that needs greater load capacity may well be sturdy for its current capacity, but now you want it for more.If you need higher capacity, please readIncreasing Trailer Load Capacity.
Please Note: Sometimes the two strengthening needs will mix, so we recommend you read both articles.
Two related needs for strengthening are when making a trailer longer, orwider. Changing the existing configuration is different from strictly strengthening or stiffening, but they are related. Follow the links to the articles for each of those.
Reinforcement To Strengthen A Trailer Frame
Rickety and Wangly are a couple of fun words to describe something that is not all together solid feeling. These words don’t mean falling apart, though something falling apart certainly will feel rickety or wangly. The solution to falling apart with trailers is to put them back together – tighten bolts and/or fix broken welds.
On the other hand, making something just feel more solid is one reason to reinforce a trailer frame. After fixing the broken or loose things, then we examine other areas to reinforce and strengthen. This article is about making the trailer feel stronger or more solid when it is all together. Some good background reading is the article on Using the Right Materials for various parts of the trailer frame. Also read about Safety Factor in choosing trailer frame materials.
By The Way: If you are building a new trailer, include generous stiffening. It will pay big dividends later when you are using it. Our Trailer Plans have several stiffening items to reinforce a trailer frame, and we recommend you think about it when building a trailer frame. This is especially true when your trailer will carry something really important like a Tiny House.
Corners And Intersections
Typically, the most flexible portion of the trailer frame is at bolted connections. Next is the corners or intersections of beams. If the flex is in the beams themselves, then change directions and read about Increasing Capacity.
The way to tell which areas to reinforce is by making the trailer flex. Test it by jumping up and down on a corner of the trailer, and see if ONE corner moves a lot more than the others. Or, perhaps when jumping on one, then the opposite corner moves a lot. That is a trailer that needs stiffening.
Reinforcing the trailer frame corners is the First Step to a more rigid trailer. And, as seen in the image, a corner may not be a true sharp corner. This image shows a gusset installation on a beveled corner. This gusset is mounted on the frame bottom (it is shown upside down) because it will also serve to support the recessed deck.
The next place to look is the intersection of beams such as cross members. Adding support at key cross beams will strengthen and reinforce a trailer frame significantly. Another place of intersection is where the tongue mounts into the frame. You do not have to reinforce every one, but definitely the ones that carry extra pressures or stresses.
Gussets & Angle Braces to Strengthen A Trailer Frame
If you like building stuff, gussets and angle braces are big-time friends. They come in hundreds of varieties, and they all strengthen and stiffen corners and intersections. They are great on trailer frames and just as necessary in avoiding Gantry Crane Failures. Use them to stiffen things, and to strengthen corners.
Here are several styles with some info on where they serve best.
Flat Plate
The First incarnation is the simple flat plate of steel bracing the corners. These are ‘Horizontal Flat Gussets’ and they give strength to the frame laterally.
Usually they are cut with 45° ends to weld in, but make the angle fit the need.
Best Use: Short spans, and tight spaces.
Flanged Flat Gusset
The Flat Horizontal gusset is great if your trailer bolts together, yet needs strength in the joint. Choose this because you can easily fabricate a gusset with flanges to bolt in. These drastically stiffen a corner.
Best Use: Bolt-Together trailers.
Flat Vertical Gusset
This Second flat option is similar, but places the gusset vertical. This gives more “twisting” rigidity to the trailer frame joint.‘Vertical Gussets’ like these provide much of the lateral stiffness of a Horizontal Gusset, but also add a little more twisting stiffness.
It is also easy to make a bracket like this as a bolt-on by adding bolt tabs on each end, but bolting does negate some of the added twist stiffening.
Best Use: Short span, and welded designs.
L-Angle Gusset
A Third type uses ‘L Bar’ (commonly ‘Angle Iron’) to give stiffness with a combination of the above two options. The big advantage is the L shape adds stiffness to the gusset itself allowing a longer gusset or a little thinner material. It is not as easy to bolt in, however.
Best Use: Longer spans, stiffer than flat.
Tube Gusset
And aFourthtype is a closed section beam which gives stiffness in 2 directions as well as in torsion. This is a combination of all the above plus some.
If you have a choice and want a lot of bang for the buck to stiffen and strengthen a trailer frame, weld in gussets like this. Use square, rectangular, or round tube.
Best Use: Longer spans, and maximum added stiffness. Also, thinner tube material for the same strength.
Crossmembers And Beams
The beams of the frame also help with stiffness. Not just the main beams, but the cross members too. They carry vertical loads, and they carry a torque load when the forces are uneven. That is one aspect of how a trailer is stiff when jumping up and down on on corner. All frames will flex a little, and that is OK, but it should not be a lot.
Each beam shape (profile) has a purpose. To increase the torque carrying capacity, add tubes as cross members – rectangular or round. These are sometimes called torque tubes because they carry torque from one main side frame rail to the other.
Note that round tube crossmembers are not as easy to connect to – like to bolt the bed material down. Squares of similar size give nearly the same torsional stiffening effect.
Finally, continuous sides (especially when welded) will strengthen a trailer frame.
Welding vs. Bolting
It may be obvious, but the biggest stiffening effect for a trailer frame comes with welding rather than bolting – especially when reinforcing with a few gussets. Bolting is nice for taking it apart, and it is easier to assemble. Yet, often the only reason for bolting is for shipping prior to assembly. If getting it to you is the only reason for the bolts, then weld it.
Yes, welding means removing paint, then re-painting after. The decision to do that is a matter of how much you want stiffness and strength. However, as noted above, welding is not the only way.
Bolt-on gussets add both strength and stiffness, so if you don’t want to weld, add some bolt-on strengthening members. See above for some simple bolting gusset ideas. Also, a great example of a strong bolt-on gusset is in the image from a blog no longer available.
Bolting does require some added thought and some common sense for getting it right. Sometimes the best answer is to have some areas welded, and others bolted.
Fold Up Trailers
The folding trailer(s) sold through retailers like Harbor Freight have been popular for years. They fill a light duty niche in the market with an inexpensive, functional product. As much as people love them, they are also the target of a lot of complaints about stiffness.
A common need to strengthen a trailer frame comes with these fold-up trailers. Harbor Freight type trailers are not bad when they are new, but after being used a bit, they typically do become a little rickety. See above about bolting and welding.
Note: According to someone on Bogleheads.org, Harbor Freight folding trailers are no longer available. Interestingly, it appears folding trailers from Northern Tool are also not available at time of this writing. Let us know why if you have inside information. Seems like that is a niche to fill.
With all that said, one customer submitted a nice story of making some serious upgrades to just such a trailer. Using some of the ideas from above, the revised Harbor Freight trailer he did became something much more. From cheap kit to greatly Improved.
Strengthen The Fold Up Trailer
In order of biggest bang for the buck to strengthen a folding trailer frame like the above, do these things. Do or skip the steps as make sense for the function you want:
1st and easiest – install new plywood decking and tighten all the bolts. The decking is a very effective gusset if it is tight and secure. Thicker plywood will give more stiffness. Use washers on the plywood for better clamping (so it does not just pull the bolt head into the wood).
2. Add in gussets. If you are bolting them in, use the Secondstyle of gusset as above. If you are willing to weld, do the Fourth type.
3. If you ARE willing to weld, weld all the joints – except the folding joints (if you want to preserve the fold-up feature). Welding joints that are not involved in folding will not harm the function of folding, yet it will stiffen and strengthen the trailer. When done, you can still fold it, you just won’t be able to take it apart.
3. If you are NOT willing to weld, tighten bolts. If they don’t have them already, use Nylock or other locking fasteners. Maybe even add a few bolts if you see good places for them.
4. If you don’t need the fold-up feature, weld stiffeners (like strips of metal) over and under the joints extending at least 16 inches either side of the joint. The folding joints are a big source of “rickety” on these fold-up trailers. The other option is to bolt the joints better.
5. Permanently attach the sides and make them continuous from front to back. This will reinforce the trailer frame as well as the sides.
Solution From A Customer
To strengthen and stiffen the trailer frame where the tongue beam mounts to the frame, here is what one customer did. These added gusset plates for the tongue beam create a lot of torsional stiffness for the tongue beam itself. They also anchor it very securely.
(Please note that this is a view of the bottom of the trailer. The frame is sitting up-side-down.)
For a heavy duty trailer like this, adding gussets can work well. Not needed for a lighter duty trailer.
Thank you for sending the photo. We really appreciate seeing, and sharing, your work!
—
The next photo shows how one customer boxed in the attachment of an adjustable hitch channel on the tongue of his trailer. This is definitely very robust!
Certainly if the hitch was a concern, this will strengthen the trailer hitch connection to the frame.
I like making sure things are strong enough. This is a little overkill in some respects, but it has got to be the cleanest connection for an adjustable hitch that I have ever seen.
Again, thank you for sending the photo.
By the way, if you are interested in using an adjustable hitch, try these articles with some things to consider for an adjustable hitch.
Good Luck As You Strengthen Your Trailer Frame!
