[Solved] How many sets of yarn are used in weaving? (2024)

Question

Direction: Read the given passage and answer the questions that follow.

Woven cloth is normally much longer in one direction than the other. The lengthwise threads are called the warp, and the other threads, which are combined with the warp and lie widthwise, are called the weft. An individual thread from the warp, of indefinite length, is called an end; each individual length of weft, extending from one edge of the cloth to the other, is called a pick, or shot. Consecutive picks are usually consecutive lengths of one piece of weft yarn that is repeatedly folded back on itself. In all methods of weaving cloth except the rudimentary form of darning, before a length of weft is inserted in the warp, the warp is separated, over a short length extending from the cloth already formed, into two sheets. The process is called shedding and the space between the sheets the shed. A pick of weft is then laid between the two sheets of warp, in the operation known as picking. A new shed is then formed in accordance with the desired weave structure, with some or all of the ends in each sheet moving over to the position previously occupied by the other sheet. In this way the weft is clasped between two layers of warp.

Since it is not possible to lay the weft close to the junction of the warp and the cloth already woven, a further operation called beating in, or beating up, is necessary to push the pick to the desired distance away from the last one inserted previously. Although beating in usually takes place while the shed is changing, it is normally completed before the new shed is fully formed. The sequence of primary operations in one weaving cycle is thus shedding, picking and beating in. At the end of the cycle, the geometrical relation of the pick to the warp is the same as it would have been if the pick had been threaded through the spaces between alternate ends, first from one side of the cloth and then from the other, as in darning. This is the reason the weaving process is considered an interlacing method.

View all DSSSB Junior Secretariat Assistant Papers >

1. Four sets: threads, warp, stitching and garments
2. Three sets: warp, shot and weft
3. One set: lengthwise yarns
4. Two sets: warp and weft