Log into the instance where you want to mount the file system.
See Connecting to an Instance.
Example:
ssh [email protected]
Install the NFS client using this command:
sudo yum install nfs-utils
Create a directory that will be used as the mount point.
Replace <yourmountpoint> with a directory name of your choice. Example:
/mnt/mountpoint-A
See AlsoHow to Check the Mount Points in Linux? - Scaler TopicsMount-pointsMaster the Linux ‘mount’ Command: A Comprehensive GuideHow To Mount Multiple Filesystems On The Same Serversudo mkdir -p <yourmountpoint>
Mount the file system.
Caution
Omitting the
-o nosuid
option can allow unprivileged users to escalate their permissions to 'root'. Thenosuid
option disables set-user-identifier or set-group-identifier bits within the mounted system, which are rarely used.Example:
sudo mount -t nfs -o nfsvers=<version>,nosuid <10.x.x.x>:<fs-export-path> <yourmountpoint>
Replace <version> with one of the following, based on the NFS protocol version you want to use:
3,noacl
4.0
4.1
Replace <10.x.x.x> with the mount target's private IP address. See Obtaining the Mount Target IP Address .
Replace <fs-export-path> with the export path that was generated when the export was created. See Creating an Export for a File System.
Replace <yourmountpoint>with the full path to the local mount point.
View the mounted file system.
df -h
Write a file to the file system.
Replace <yourmountpoint> with the path to the local mount point and <filename>with your file name.
sudo touch /mnt/<yourmountpoint>/<filename>
Verify that you can access the file system and view the file.
Replace yourmountpoint with the path to the local mount point.
cd <yourmountpoint>ls
Add the file system mount information to the appropriate mount file for your OS.
So far, the file system is manually mounted to the client. If the client is rebooted, the file system won't automatically mount unless you add it to the mount file (for example the
/etc/fstab
or/etc/vfstab
file).
FAQs
How to mount a filesystem in CentOS? ›
- Log into the instance where you want to mount the file system. ...
- Install the NFS client using this command: sudo yum install nfs-utils.
- Create a directory that will be used as the mount point. ...
- Mount the file system. ...
- View the mounted file system.
Mounting makes file systems, files, directories, devices, and special files available for use at a particular location. It is the only way a file system is made accessible. The mount command instructs the operating system to attach a file system at a specified directory.
How to mount a filesystem in Linux permanently? ›You can mount file systems for a single session using the mount command, and permanently by editing /etc/fstab . Mounting needs to be done by an administrator, either by logging in as root or by using the sudo command. There are some cases where mounting is done automatically, like when you insert a USB flash drive.
What file system type is Red Hat Linux? ›The XFS File System. XFS is a robust and mature 64-bit journaling file system that supports very large files and file systems on a single host. It is the default file system in Red Hat Enterprise Linux 7.
How to install a file in CentOS? ›- For a USB UEFI boot, follow the steps: Mount the volume: mount /root/CentOS-install/images/efiboot.img /mnt/ Edit the file /mnt/EFI/BOOT/grub.cfg : ...
- For a CDROM UEFI boot, follow the steps: Edit the file /root/CentOS-install/EFI/BOOT/grub.cfg : Add a new menu entry to the file:
On Linux instances, if you want to automatically mount exported file systems during an instance boot, you need to add the mount information in the /etc/fstab file. Log into the instance where you want the file system mounted. See Connecting to an Instance. Create a mount point, if one hasn't been created.
How to mount a disk in Red Hat? ›- Specifying the File System Type. In most cases, mount detects the file system automatically. ...
- Specifying the Mount Options. To specify additional mount options, use the command in the following form: ...
- Sharing Mounts. ...
- Moving a Mount Point. ...
- Setting Read-only Permissions for root.
- Create partitions using fdisk or Disk Utility. ...
- Format the partitions using mkfs or Disk Utility.
- Mount the partitions using the mount command or automate it using the /etc/fstab file.
Red Hat Linux was a widely used commercial open-source Linux distribution created by Red Hat until its discontinuation in 2004. Early releases of Red Hat Linux were called Red Hat Commercial Linux. Red Hat published the first non-beta release in May 1995.
What is the default file system in RedHat Linux? ›XFS is the default file system in Red Hat Enterprise Linux 7 and Red Hat, and Red Hat recommends you to use XFS unless you have a strong reason to use another file system.
What is the difference between Red Hat Linux and Linux? ›
How is RedHat Enterprise Linux different from Linux? RHEL is an operating system that uses (the) Linux (kernel) as one component, the kernel. But it contains other stuff too, like the actual userspace programs that are necessary to use the kernel in any meaningful way. Plus it packages applications programs.
How to mount XFS filesystem in CentOS 7? ›- Login as root. **su - **2. Find the device name using: fdisk -l.
- Create a mount point. **mkdir /mnt/mydrive. **4. Mount the drive. Please use the device name you found in step 2 (such as /dev/sdb1). ...
- You can navigate to it using **cd /mnt/mydrive **and list files using ls.
- Step 1: Check the available disks on the system: ...
- Step 2: Partition the new disk: ...
- Step 3: Format the new partition: ...
- Step 4: Create a mount point: ...
- Step 5: Mount the new partition:
- Identify NTFS Partition. Before mounting an NTFS partition, identify it by using the parted command: sudo parted -l.
- Create Mount Point and Mount NTFS Partition. ...
- Update Package Repositories. ...
- Install Fuse and ntfs-3g. ...
- Mount NTFS Partition.
- cp /etc/fstab /etc/fstab.orig (**backup the config file before change to avoid loss of original settings if any)
- vi /etc/fstab.
- Add this line at the end: /dev/ssd /mntssd ext4 defaults 0 2.
- Save the file and exit the editor.
- Use “mount -a” command to verify the fstab settings added correctly.