Mobile phone and seatbelt detection cameras - TAC (2024)

How the cameras work

Cameras are trailer-mounted and parked on roadsides to photograph approaching vehicles. Infra-red flash units are used for illumination of the number plates and for the cabin interiors (resulting in monochrome images).

Low-mounted cameras record the number plate of each vehicle, and the space above the dashboard, and elevated cameras record the lap areas of both the driver and front-seat passenger.

The cameras are enabled with artificial intelligence (AI) software. Cameras take high-resolution images any time of the day or night, and in all traffic and weather conditions.

Mobile phone and seatbelt detection cameras - TAC (1)

Using artificial intelligence software

The cameras use artificial intelligence (AI) software to filter images and detect possible mobile phone use by the driver, or failure to wear a seatbelt by the driver and front seat passenger.

The AI technology automatically reviews the images it takes. If it does not see a potential offence, it will reject the image.

If the AI detects a driver who may be using a portable device or not wearing their seatbelt it flags the image for further review. Images where there might be a potential offence are then checked and verified by a qualified independent officer.

Illegally using a mobile phone when driving significantly increases the risk of being involved in a serious crash. It is estimated that the new cameras will prevent 95 casualty crashes a year.

Find out more about how the camera’s work visit the Department of Justice cameras save lives website.

Your privacy

The government values protecting the privacy of drivers and passengers and will continue to work closely with the Office of the Victorian Information Commissioner to ensure the cameras operate in compliance with privacy obligations.

For more information about the ways in which the images are captured by the cameras, please visit the Victoria Government website here.

Mobile phone and detection cameras are now in use across Victoria. Along with the introduction of cameras there have been changes to road rules in relation to using devices while driving and riding motorcycles.

Why are cameras being used?

Victoria’s road safety camera program plays a critical role in changing driver behaviour, preventing road trauma and reducing the number of lives lost on our roads. This legislation ensures cameras can tackle the growing risk of drivers using mobile devices or not wearing seatbelts correctly.

What rules apply to the use of devices while driving or riding a motorcycle?

Road rules have been introduced to regulate the use of a range of portable, wearable and inbuilt devices while driving a vehicle or riding a motorbike. The rules expand and clarify a number of rules already in place for mobile phones, and take effect on 31 March 2023.

The rules reflect the significant increase of in-vehicle technologies and other technologies capable of distracting a driver and are designed to help keep people safe on our roads.

The rules are expanded from mobile phones and visual display units to cover:

  • Portable devices (unmounted mobile phones, tablets);
  • Wearable devices (smartwatches, wearable heads-up display);
  • Inbuilt devices (Information, navigation, and entertainment systems, heads-up display that is an inbuilt part of the vehicle);
  • Mounted devices (Heads-up display, tablet, mobile phone, media player etc if securely mounted in or on a vehicle); and
  • Motor bike helmet devices.

Rules for L and P platers are different to those for fully licensed drivers.

You can find out further information in regards to cameras and the law on the VicRoads website.

What are the rules for drivers with a full licence?

Drivers who hold a full licence in general cannot touch an unmounted portable device, such as a phone, tablet, laptop or any other device while driving.

Specifically, for all device types (portable, mounted, wearable and inbuilt) you must not, while driving:

  • enter text, numbers or symbols
  • scroll (such as on websites, social media, playlists)
  • play videos or games or take video calls
  • display text messages, social media, emails, or photos
  • rest a device on any part of the body, or pass a device to a passenger.

Rules for portable devices such as unmounted or loose mobile phones, tablets, laptops, media players and game-consoles

When driving (except when parked), you must not:

  • Touch a portable device, even if it is turned off
  • Allow a portable device to be in your lap or on any part of your body or clothes (unless it is in a pocket, or in a pouch attached to your belt or other part of your body)
  • Look at the display of a device being operated by another person in the vehicle
  • Pass a portable device to a passenger
  • If a passenger, pass a portable device to a driver

You can:

  • Connect to your vehicle’s Bluetooth and place the device out of sight and reach before you start driving.
  • Use a mobile phone or other device to pay at a drive-through.

Rules for mounted devices (mobile phones and tablets) and inbuilt navigation and entertainment systems

For mobile phones and tablets, the mounting must be commercially designed and manufactured for that purpose, and the device must be secured in the mounting.

As a general rule, drivers can use their mounted or inbuilt systems for functions such as music and navigation, provided they are not entering text, scrolling or viewing images or video.

When driving (except when parked), you must not:

  • Enter information, text, numbers or symbols (unless using voice control)
  • Scroll on the device (such as scrolling through texts messages, social media, music etc.)
  • Use the device for:
    • Reading or writing text messages, emails, message threads or viewing websites
    • Watching movies, TV, video games or other moving images
    • Viewing social media and photos
    • Video calls.
  • If a passenger, you must not use the device if it is likely to distract the driver.

You can however, touch the device briefly to:

  • initiate, accept or reject an audio call
  • play or stream audio material
  • adjust volume levels
  • use a function on the device designed to assist you to operate the vehicle
  • use a navigation function
  • use a function on the device designed to monitor a driver’s behaviour or condition, or
  • carry out a professional driving task

Rules for wearable devices such as smart watches, smart glasses and wearable heads-up displays

When driving (except when parked) you must not:

  • touch the device (other than by incidental contact caused by wearing the device)
  • use the device, for example, for any of the following:
    • Reading or writing text such as messages and emails
    • Viewing social media and photos
    • Engaging in video calls
    • Using a navigation function on the device
  • use a function on the device designed to monitor a driver’s behaviour or condition
  • carry out a professional driving task.

However, you can do the followingbut only if using voice controls:

  • initiate, accept or reject an audio call on the device
  • play or stream audio material on the device
  • adjust volume levels.

What are the rules for motorcycle helmet devices?

These rules apply to head up displays, communicators, cameras and inbuilt or secured mobile phones.

The only actions motorbike riders can use to operate helmet devices is limited to touching the device briefly, or using voice commands, to:

  • initiate, accept or reject an audio call on a device
  • play or stream audio material on the device
  • use a function on the device designed to assist a driver to operate a vehicle
  • use a navigation function on the device
  • use a function on the device designed to monitor a driver’s behaviour or condition (such as a heart monitor)
  • carry out a professional driving task, and
  • adjust volume levels for any of the above

What are the rules for Learner, P1 and P2 drivers?

Due to their lack of experience and increase road safety risk, L and P platers are subject to more restrictions when it comes to distracted driving.

What can’t L and P platers do when driving or riding motorbikes?

L and P platers when driving cars or riding motorbikes cannot:

  • operate portable devices (such as mobile phones, tablets or laptops) in any way, including for phone calls and navigation
  • use voice controls to operate any devices
  • enter text, numbers or symbols
  • scroll (such as on websites, social media, playlists)
  • play videos or games or take video calls,
  • display text messages, social media, emails, or photos
  • rest a device on any part of the body, or pass a device to a passenger

A limited number of interactions are allowed with mounted and inbuilt devices. These are outlined below.

Rules for mobile phones, tablets, laptops, media players and game-consoles (portable devices)

As an L or P plater, you are not allowed to operate a non-mounted portable device in any way when driving, even when stationary but not parked.

When driving, you must not:

  • Touch a portable device (regardless of whether the device is on or off)
  • Look at the display of a portable device being operated by another person
  • Allow a portable device to be in your lap or resting on any part of your body or clothes (unless it is in a pocket or a holding pouch attached to your clothes e.g. to your belt)
  • Operate a portable device at all - not even by using voice controls
  • Have any ongoing activity on a portable device while driving (such as audio or navigation setup prior to driving).

If you want to operate a portable device in a motor vehicle, you will need to be parked.

Rules for mounted devices (mobile phones and tablets) and inbuilt navigation and entertainment systems

For mobile phones and tablets to be considered a “mounted device”, the mounting must be commercially designed and manufactured for that purpose, and the device must be secured in the mounting.

As an L or P plater if you use a mounted device or an inbuilt device while driving, you must not:

  • Scroll or enter information, text, numbers or symbols on mounted or inbuilt devices.
  • Use voice controls to operate any mounted or inbuilt devices.
  • Use the device for:
    • Reading or writing text messages, emails, message threads or viewing websites;
    • Watching movies, TV, video games or other moving images;
    • Viewing social media and photos;
    • Video or audio calls.

However, as an L or P plater you can:

  • Usemounted devices for navigation and playing audio (such as music or podcasts) providing it is set up before a journey commences. You must pull over and park to change a song or enter a different address. You are not permitted to touch a mounted device for any purpose during a drive.
  • Briefly touch yourinbuilt device to adjust navigation settings, climate controls and audio functions (such as the radio).

Rules for smart watches, smart glasses and wearable heads-up displays

You cannot:

  • Touch a wearable device (other than by incidental contact with the device caused by the driver wearing the device)
  • Operate the device using voice controls
  • Look at the display of a wearable device being operated by another person in the motor vehicle
  • You are allowed to play or stream audio material on a wearable device, provided it is set up before you begin driving, or by pulling over and parking first.
  • You can only operate the wearable device by permitting ongoing activity on the device. This means you will need to park before you can touch the device or use voice controls to adjust the volume or change what audio is playing.

What can I do with a wearable device?

  • You are allowed to play or stream audio material on a wearable device, provided it is set up before you begin driving, or by pulling over and parking first.
  • You can only operate the wearable device by permitting ongoing activity on the device. This means you will need to park before you can touch the device or before you can use voice controls to adjust the volume or change what audio is playing.

Rules for Motorbike helmet devices (head up displays, communicators, cameras and inbuilt or secured mobile phones)

Other than using the device for images or information associated with the safety or operation of the bike, L and P platers can only use motorbike helmet device for:

  • Playing or streaming audio material (music, podcasts, audio books)
  • Navigation

However, you must not:

  • touch the device or use voice controls when doing the above.

The functions need to be set up before you start driving, and you must pull over to change the settings.

For more information please visit the Department of Justicecameras save lives website.

How the cameras work

Cameras are trailer-mounted and parked on roadsides to photograph approaching vehicles. Infra-red flash units are used for illumination of the number plates and for the cabin interiors (resulting in monochrome images).

Low-mounted cameras record the number plate of each vehicle, and the space above the dashboard, and elevated cameras record the lap areas of both the driver and front-seat passenger.

The cameras are enabled with artificial intelligence (AI) software. Cameras take high-resolution images any time of the day or night, and in all traffic and weather conditions.

Mobile phone and seatbelt detection cameras - TAC (2)

Using artificial intelligence software

The cameras use artificial intelligence (AI) software to filter images and detect possible mobile phone use by the driver, or failure to wear a seatbelt by the driver and front seat passenger.

The AI technology automatically reviews the images it takes. If it does not see a potential offence, it will reject the image.

If the AI detects a driver who may be using a portable device or not wearing their seatbelt it flags the image for further review. Images where there might be a potential offence are then checked and verified by a qualified independent officer.

Illegally using a mobile phone when driving significantly increases the risk of being involved in a serious crash. It is estimated that the new cameras will prevent 95 casualty crashes a year.

Find out more about how the camera’s work visit the Department of Justice cameras save lives website.

Your privacy

The government values protecting the privacy of drivers and passengers and will continue to work closely with the Office of the Victorian Information Commissioner to ensure the cameras operate in compliance with privacy obligations.

For more information about the ways in which the images are captured by the cameras, please visit the Victoria Government website here.

Mobile phone and seatbelt detection cameras - TAC (2024)

FAQs

Mobile phone and seatbelt detection cameras - TAC? ›

The cameras use artificial intelligence (AI) software to filter images and detect possible mobile phone use by the driver, or failure to wear a seatbelt by the driver and front seat passenger. The AI technology automatically reviews the images it takes. If it does not see a potential offence, it will reject the image.

How mobile phone and seatbelt detection cameras can answer? ›

Mobile phone and seatbelt detection cameras

These cameras detect and take photos of drivers who use portable devices, like mobile phones. The cameras can also pick up people in the front seats not wearing their seatbelts.

Which cameras catch you on your phone? ›

The Acusensus is a new enforcement camera system mounted to vans or placed on the roadside. The Artificial Intelligence (AI) is able to identify poor driver behaviours and road conditions, which can detect whether drivers are holding a mobile phone and if they have their seatbelts fastened.

How do phone camera detectors work? ›

How Does the Cell Phone Detector Work? The Cell Phone Detectors come with bugs which are meant to detect RF transmission signal. The moment this bug detects the RF transmission signal from an activated cell phone, the LED light started blinking, and it starts making a beep alarm.

Does Victoria have mobile phone detection cameras? ›

Mobile phone and seatbelt detection cameras target drivers who use portable devices such as a mobile phones while driving. They also can pick up drivers and front seat passengers not wearing their seatbelt.

How does passenger seatbelt sensor work? ›

The sensor is in a normally open position. When the seat belt buckle thorn moves from an unlatched to a latched position the magnetic circuit will be complete, activating the Reed Switch to close its contacts sending a voltage output to the customer's electrical interface.

What sensors do phone cameras use? ›

While there are a number of different types of camera sensor, by far the most prevalent is the complementary metal-oxide semiconductor (CMOS) sensor, which can be found inside the vast majority of modern digital cameras. This includes smartphones, compact cameras and mirrorless interchangeable-lens cameras (ILCs).

Can someone watch you through your cell phone camera? ›

Mobile spyware is malware that allows hackers to steal information and watch anything within view of your phone camera. It can also enable them to access your microphone, location, calendar, and contacts. This makes it possible for hackers to record your videos and calls.

What are the 3 cameras on phones for? ›

From top to bottom, these are the long-focus camera, the color camera, and the monochrome camera. The long-focus camera helps to magnify distant objects and include them in your photo. The monochrome camera plays an important role in capturing details.

How do you know if your phone is being surveilled? ›

To help you protect your private information, here are several signs and methods for determining whether or not your phone is being monitored.
  • Strange permission requests. ...
  • Higher battery consumption. ...
  • Overheating. ...
  • Unusual noises. ...
  • Increased data usage. ...
  • Call *#21# or *#62# ...
  • Check your Apple ID account page.

How accurate are mobile phone detection cameras? ›

Accuracy of the technology

The Mobile Phone Detection Camera vendor is contractually obliged to prove successful equipment accreditation at all times. If needed, they are also required to provide such evidence in court. Interstate experience has shown consistent levels of accuracy in detecting mobile phone incidents.

What is a mobile phone detector? ›

A mobile phone detector can detect the activation of a mobile phone such as; incoming and ongoing phone calls, messages, and things in that nature. Mobile phone detectors can be used for spying on someone and for unauthorized video transmission.

Does the government have access to our phone cameras? ›

The government can read your messages and emails, take pictures of you, and even obtain the files on your phone. Government spying is nothing new in the US; anyone can be monitored through their phone, especially US citizens. Additionally, the government doesn't need physical access to watch you through your phone.

Can police look through your phone camera? ›

Can police perform a search of your cell phone without a warrant? In general, no. The U.S. Supreme Court in Riley v. California has ruled that the police must have a valid search warrant, based upon probable cause, before they can perform a cell phone search.

Can someone access my mobile camera? ›

Can your phone camera be hacked? If your device has been compromised, it's possible for someone to hack into your phone camera and spy on you in real-time. This can be done remotely over a Wi-Fi network, and it's just one of many reasons why you should use a VPN whenever you use unsecured public Wi-Fi.

How do security cameras work with cell phone? ›

4. Cellular Surveillance Cameras Offer Remote Viewing From A Smartphone. Although the camera is independent, you can use cellular cameras as surveillance cameras by logging into the camera's smartphone app. The app allows homeowners to access live video footage at any time.

How does cell phone surveillance work? ›

Cell Phone Surveillance – How the Police Can Observe your Mobile Phone. phone calls, but also for checking emails, surfing the web or using social media. police also receive a copy of every SMS you send with that number. means, that the police can also track your movement while you use the phone.

How is mobile phone usage detection while driving? ›

In Yasar's workb5, a neural network application was used to detect mobile phone usage with a outside camera. Berri and Osorio [6] developed a 3D vision system, using a frontal Kinect v2 sensor, to monitor the driver and monitor the use of mobile phones by drivers.

How do cameras connect to a phone? ›

To establish the connection, you'll need to download the camera manufacturer's app on your phone and follow the instructions for pairing the devices. Another option is to use a USB cable to connect your camera to your phone. This method is often used with DSLR cameras that have a USB port.

Top Articles
| CVS Optical
Free Credit Score for Business: Get PAYDEX Score Free
Fighter Torso Ornament Kit
Radikale Landküche am Landgut Schönwalde
Aberration Surface Entrances
Kreme Delite Menu
Access-A-Ride – ACCESS NYC
Directions To 401 East Chestnut Street Louisville Kentucky
123 Movies Babylon
Betonnen afdekplaten (schoorsteenplaten) ter voorkoming van lekkage schoorsteen. - HeBlad
Void Touched Curio
Sony E 18-200mm F3.5-6.3 OSS LE Review
Les Schwab Product Code Lookup
Fdny Business
Video shows two planes collide while taxiing at airport | CNN
Spn 520211
Employee Health Upmc
Koninklijk Theater Tuschinski
Gilchrist Verband - Lumedis - Ihre Schulterspezialisten
13301 South Orange Blossom Trail
Temu Seat Covers
Sandals Travel Agent Login
Ocala Craigslist Com
Weather October 15
2004 Honda Odyssey Firing Order
Maisons près d'une ville - Štanga - Location de vacances à proximité d'une ville - Štanga | Résultats 201
San Jac Email Log In
Noaa Marine Forecast Florida By Zone
The Monitor Recent Obituaries: All Of The Monitor's Recent Obituaries
Pipa Mountain Hot Pot渝味晓宇重庆老火锅 Menu
Smayperu
Where Do They Sell Menudo Near Me
Panchitos Harlingen Tx
Daily Jail Count - Harrison County Sheriff's Office - Mississippi
Toonily The Carry
Hannibal Mo Craigslist Pets
The disadvantages of patient portals
The Transformation Of Vanessa Ray From Childhood To Blue Bloods - Looper
2020 Can-Am DS 90 X Vs 2020 Honda TRX90X: By the Numbers
Armageddon Time Showtimes Near Cmx Daytona 12
Electric Toothbrush Feature Crossword
Homeloanserv Account Login
Fool's Paradise Showtimes Near Roxy Stadium 14
Sallisaw Bin Store
فیلم گارد ساحلی زیرنویس فارسی بدون سانسور تاینی موویز
Breaking down the Stafford trade
Craigslist Anc Ak
Greg Steube Height
786 Area Code -Get a Local Phone Number For Miami, Florida
Coleman Funeral Home Olive Branch Ms Obituaries
Códigos SWIFT/BIC para bancos de USA
Latest Posts
Article information

Author: Golda Nolan II

Last Updated:

Views: 5492

Rating: 4.8 / 5 (78 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Golda Nolan II

Birthday: 1998-05-14

Address: Suite 369 9754 Roberts Pines, West Benitaburgh, NM 69180-7958

Phone: +522993866487

Job: Sales Executive

Hobby: Worldbuilding, Shopping, Quilting, Cooking, Homebrewing, Leather crafting, Pet

Introduction: My name is Golda Nolan II, I am a thoughtful, clever, cute, jolly, brave, powerful, splendid person who loves writing and wants to share my knowledge and understanding with you.