Market Watch & Trading Screen (2024)

Chandrajit Das says:

Sir where can get this terminal??

Sivaranjeeni says:

Can someone let me know how to switch between the symbols in TradingViewChart. I’m expecting a similar toggle on how we do in IN.TRADINGVIEW. Toggle charts of all the symbols in my wishlist/Market watch.

Thanks in advance

Avadhut says:

Pi will be available in near future?

Sharad says:

Hi I m a happy customer of Zerodha. Needless to say I like almost all the features offered by Kite. One improvement suggestion I have is:
In the personal watch list, Can you provide a space (a new column ) to make our little notes like “Buy if comes below abc, sell if goes above xyz” etc against each scrip. Every weekend I do a study of each of my watched scrips and make such notes to set the tone for next week’s trading. If u provide this feature, I don’t have keep my notebook handy while trading. Thanks in advance

Kapil says:

Hi I am mac user and there is no Pi software and Virtual Box is not a good option so I prefer Kite for the stock trading. The problem I always face is less space for charts as ur wish list section is fixed. Could you please provide a feature for hiding or a flexible wish list . I know you have a pop up, full size chart view where you can see multiple views, max 8 but without wish list . I use three time frame charts for technical analysis for my favourite stocks and it’s very difficult without wish list.

Also i would like to suggest following this two features:
1) Auto save of your charts with drawings
2) When you are navigating through the wish list and user has opened the chart then moving to next stock using down key should open the chart for that stock without pressing C key. It’s like user is in Chart mode.

I hope these things make the kite more user friendly.

Venkateswarlu Segu says:

SIR
NEW IPO STOCKS ARE NOT ABLE TO SEE IN MARKET WATCH. HOW TO UPDATE MARKET WATCH.
PLEASE INFORM
THANKU
SVT

Anas says:

Hi

How can i check daily MTM on Zerodha – (daily profit/ loss on each position)

BhaavinAshar says:

I made 3 market watch screens (for underlying stocks of all FnO stocks) as all FnO stocks do not fit into one market watch and saved it. but next time I load that workspace only “defaut mw” got loaded. Is this how it is designed?

Please add a functionality to load all underlying of FnO stocks or allow the user to create and save more than one market watch screens.

Amit Kumar says:

PI trade book have some bugs. its time should be set in 24 HRS format, to make sure that, whenver someone try to look for TimeWise orders, he must able to see lastest orders. AFTER 1 PM, error occurs and orders shown in then end, instead of top, while arranged in Time sort order.

Girish says:

Hi Team,

Thanks a lot for providing great tool like PI to us.
I have one suggestion though.
If you could add a feature to change scrip from Chart window it will help us a lot.
Now if we have to look at chart of scrip then we must open one window for every scrip and at times it becomes very lethargic. And at the same time the way template are applied to existing chart window needs to be changes so that after application of template window will show same scrip with all indicators and will save our time.

Thanks a lot for such a wonder tool.
Happy Trading

Yogesh says:

Why the market watch that we create in Kite app is not available in Pi?

Rajendra Joshi says:

I am a user of zerodha-Pi. I tried to add newly listed scrips like Happiest Mimds & Route Mobile. But these do not appear in the dropdown from where we add stocks in watchlist. How to get such newly listed scrips on Pi watchlist?

Khadija says:

Hi

I am new to Pi and using the latest version 1.0.0.0 (at least it says no update available). In my Market watch Workspace i am not able to see an option to add columns for the upper and lower circuit. Its getting difficult to keep switching to Kite to see the circuit everytime.

Vickey says:

Hi,
How to order multiple different stocks through a single request? for example, I have 10 stocks in my watchlist and at certain time I want to buy 1 stock of each equity in watchlist. How can I do that?

Vinod Pradhan says:

Dear Sir,
I am unable to download zerodha nest trader on my laptop. i am presently using Phillip Captial and want to use both the application please send me a link to download nest trader or trading application.

Vinod Pradhan
KP5877

OP VERMA says:

Refer my inquiry above. I went through this entire thread and found answers to all my questions.
Thanks anyway. Will come back if find some additional issues.

OM PRAKASH VERMA says:

Dear Nitin ,
I am a senior citizen and still have fire to trade in stocks. I was quite content with KITE , but it has limitatations , particularly only 5 watches only with 50 stocks. So I downloaded Pi only last week ,thinking it might help.
But I have encountered some problems with Pi too.:-
1. I created 2 market watches but I do not see any option to save the watch, nor does it ask wether to save watches when I exit. I am still reading as many threads and guide lines to get my answers . I have taken a screen shot of what I have on Pi and would want to send it to you. It is not same and does not show options what you describe in your guide. Currently I would like to know :- How do I save the watch which I have created . 2. How many watches can Icreate; and how many stcks in each watch. Normally one would like to create watch as per sector , say Pharma , chemicals Cement , Metals so that you can access the stocks much faster. In a Khichadi watch system one tend to forget where have I listed my stock especially me being an old man. But I would but even younger lot would want well segregated watches ?

Akshay says:

Hi,

Unable to add 52 week high/low column on market watch . Is it unavailable on pi?

nkk7 says:

Hi,

not able to add bank nifty in market Indices.

Also not able to add index under MW for charting
pl. suggest

Tks
Neeraj

Kavish Ranjan says:

Hello Nitin Sir
Please add drag and drop feature in PI as soon as possible.It’s a humble request to you.

prasad says:

how to draw pivot point on chart

gopal says:

hi,
i am new to zerodha. so in MARKET watch in Pi, %change in stock price is not displayed after trading hours or say eod %change is not displayed.
is this issue with me or is it built in Pi software(if later is case then why)

Kameswar says:

Sir,
I am unable to trade in MCX though required fee has been paid by me. Pl. advise.

Ihit says:

Hi,
I have picked shares of the same company from the BSE and the NSE. Unfortunately, in the market watch section on the left of the screen (in KITE), my total holdings are visible in the ticker in which I first purchased OR have larger holdings. Is it possible to show in the market watch, my exact holdings in the NSE and the BSE, instead of having to visit backoffice to view them, so that i don’t sell the shares on the wrong exchange?

Vijaya Shanker says:

Nithin, Pls inform me how to create a watchlist with NSE 100 and Bse100.
Thanks in advance.

Kokila says:

I am holding an account with you.
I came to to know that we can automate the trading. Please let me know how to implement the following strategy using pi platform::
buy:
If NIFTY moves above 10768, I would like to buy one lot of call option NIFTY18MAY11000CE
sell:
if NIFTY moves below 10642, I would like to sell one lot of call option NIFTY18MAY11000CE

dev ravaliya says:

i cant see mcx’s futures in pi platform…..i can only nse bse cds options….and i hv account for atleast 5 month…..but i never added fund in commodity….. is it like that?

Rama says:

Hi zerodha…when vl you provide the service of highlighted colours for day high/low of scripts in MW in pi as well as kite web

YOGESH says:

SIR

I M ZERODHA CUSTOMER AND JUST LOGIN KITE BUT IN MARKET WATCH SEE SENSEX BUT STILL NOT SEE TO NSE

Karthik Rao says:

hello zerodha team ,
i would like to tell you that u guys are doig the great job,butin pi there are certain set backs
1) i am not able to add more 50 script
2) there need to be an event Tracker tab option which can help see the stocks which break certain parameter i.e break out of day high/low & 52 week H/L and moving average surpass and so on
Please do add such important features in pi which will help traders alot
Thank you

Amit Parmar says:

it is good to see founder himself replies about queries, great keep it up……… M also opening account ..

Bhushan says:

I want to use current active positions for a stock in my strategy. So how can I access active positions in my trading script?

Harshad Mainkar says:

How much net worth is required to trade Future & Options in Stocks ?

mohan says:

I need Days High/Low on my PI screen to be Highlited in different colours is it possible
Pls guide me in doing so.

Dhananjay says:

Can we install PI on imac ? please send the exact details and steps to do so if possible

Harshad Mainkar says:

Hi, I have Equity Demat & Trading account. But, I can see only BSE & NSE in Pi and No NFO. Do I need to open Equity Derivative account to trade F&O or is it part of my Equity Trading account ?? so Lost ..Btw.. I am loving Zerodha You guys are doing great job Thank you 🙂

Yogeeswar says:

Various sectors should be included, the sectorial indices and the stocks constituting them along with Default MW. I find this is the only advantage missing in Pi which I had in TradeRacer from ICICIDirect.

vibhor says:

Why NFO, CDS and BFO options are not enabled in my Pi platform. There are only NSE and BSE options enabled.

And what’s the use of NSE/NFO/BSE/…. and Normal Market Close/OddLotMarketClose/….. options present in the toolbar of Pi?

BIKRAM SINGH says:

Sir, i am very new to pi plateform. I am using pi version V 1.0.06 ( 07.17.2017 ).My placed order / rejected order / executed order does not show in “connection and order status” windows ( control + shift + w ) (other information shows there) , just below the market watch along with “alerts and message windows”. My friends can see it there on their own pi but i have to go to “order book ” or trader book ” to see my rejected /executed order. It is worth painful in running market because it keeps me in dillema or dark that what happened to my order and also unfriendly especillay when my stoploss orders get triggered and i remain unaware till to watch “order book’ or “trade book”.
Sir, time is the single most and vital factor in intraday trading. So you can easily understand that what kind of problem I am facing. As i could understand, it is matter of technical setting, because it is a very vital and common features given by all trading terminals.
So please guide me to to settle it.
Thanking you.

Anshul says:

Also, programming in PI for scripts /alerts seems like a pain since I do not know the predefined variables. For example , I am looking for a good alert for Opening Range breakouts for FNO stocks only. A guide / glossary with names of terms would be very helpful.

Anshul says:

Also, Pi hangs at least once for me everyday. Waiting for few mins doesnt help and I need to force close and restart it. I think it hangs on waiting for chart retrieval / bugs / etc. I have a top of the end alienware laptop so no issues with hardware. I think you could solve the issues by through using separate threads for chart retrieval / computation etc .. Also have functionality to break whatever is being processed with a break command like CTRL +C or something. I usually need to also keep KITE open in the background for emergency trades when PI might hang.

Anshul says:

Can I add all FNO stocks to marketwatch in PI?
A feature to add stocks having marketcap in a particular range would be cool.
Also in find a stock, having an option to only see EQ or NFO would help limit the number of entries seen.

Anshul says:

Please add view chart, add scrip to MW and add(Opposite of Square off) options in Admin Position.
Also, please add Open Interest as a Study for FNO.

akd says:

Hi! Nithinji,

Unfortunately i found nothing like EOD Scanner in PI. I tried this way…….

PI>ALERTS>SCANNER>NEW SCANNER>SCANNER SETTING>DATA SOURCE>PERIODICITY>MINUTE/HOUR (**No “DAY”)

If there is any other method inside PI then requesting you to kindly elaborate or write a separate blog, if possible. Otherwise please add the “DAY” option in PI Scanner’s Periodicity. It”ll be a great help for your users.

Wish to get a reply this time 🙂

Amitava Ganguly says:

Whether it is feasible to trade with candle stick live chart 5m/20 period EMA on screen with 4 layouts for 4stocks? at a time

Sudipta says:

Can you please tell me how to add currency index on market watch on kite?

Rama says:

Hi,
I m using PI.. Is there any alert type in my market watch for stocks touching day high with green colour and stocks touching day low with red coulour …same facility in kite mob app also. .. Pls assist …

akd says:

Hi!
PI is an excellent software but without any EOD screener or filter (Daily or longer time frame) !
Does Zerodha only encourage Day traders, not investors or swing traders!!
Requesting you to kindly incorporate this feature in PI.
Correct if I’m wrong with my information & kindly explain how to do it.

Thanks in advance:-)

rajat says:

i am not able to add future and option in the market watch. pls guide how to do it

Birendra Hansda says:

Hi

It’s really difficult to add stocks in the watch list as there are too many filters in PI.

Ex- To add a scrip to the market watch, why does one need to select the class A,B,C etc .

It’s just the scrip that should autopopulate the scrip symbol and then click on add.

It’s the same for F&O. It would be great if we had the option to add all the strike prices for an option in market watch .

It would be great if these issues are addressed.

Regards
Birendra

Vel says:

I had installed Pi yesterday, but i can see only BSE,BFO in the market watch list. I’m not able to see other exchanges in the drop down. I have a Demat with Other DP and it is linked to Zerodha while account opening. Kindly do the needful.

Prakash Tejwani says:

Can we have Alert system in Pi, like we have in NEST Trader (Tools Menu -> Set Alert) ?

Mana Das says:

Add RENKO with ATR in PI and also in Kite…..

Tadepalli says:

Hi, Good morning. Started using Pi today. I am not able to create and save multiple market watch.On exit, they are not getting loaded. I am saving the work space and loading the same too. Appreciate some help

Hriday says:

Hi, Is there any option to add Nifty top contracts (Stock Futures/ Stop Options etc) live directly in Pi?

Thanks.

Mounish says:

I am waiting for more scripts to embed in PI as today there almost 200 F&O scripts available.
More opportunity should be opened. As there are huge development in internet almost everybody is carrying 2 MBPS internet, high end hardware etc.. So the old barrier of only 50 scripts in MW should be at least 200!

Praveen says:

I want to open multiple trading and demat accounts. And to maintain and trade those accounts I want to hire emplyoees for that.. . Is it possible? Give me some suggestion and Idea please

Kiran Chengappa says:

Once I login to Pi, I would love to have 5 market watches with however much scrips in each of them. Your limit is max 50 in each and I get to monitor 250 in total which is great. However the most frustrating part is, once I exit and login back to Pi, I can see only the default MW with the 50 scrips that I added. The remaining 4 don’t retain anything.
I arrange scrips sector wise and really want to monitor different scrips across sectors. How annoying it is to login to Pi everyday and spend 1 hour or more to just add scrips to the 4 MWs.
PLEASE PLEASE make the 4 extra MWs that I create to save everything on exit just like the default MW.

Prakash Gupta says:

Hello Team Zerodha,

Please update pi with following features :-
1. Pre-defined market watch for F&O scrips so that we don’t need to add so many scripts one by one.
or,
Allow adding list of scrips via a text file.
2. Allow real time market watch link to excel

Looking for the assistance
Thank You

Ramesh says:

Hi

How to add the entire FnO scripts in Watch List

MOUNISH CHOUDHURY says:

How to make link to Excel for 200 FO scripts

vikas says:

hi,
nithin sir,
just applied for n commodity acconut,my query is
1. may i square of my opened position buy/sell directly from chart
2. for intraday why product as cnc not work

Regards
Vikas

PROBAL GHOSH says:

Sir,
Zerodha Pi is a great desktop software and better than Kite in many areas but Pi is not good for backtesting cause -The chart layout is rigid and can’t easily move around like Kite.
-Intraday data limit is only 120 days which also include holidays!!
-The measurement tool is not available so price, time and candle/bar range can’t be calculated automatically.

So please pay attention to the Pi to improve it rather than on kite or make kite available with all Pi features.

Mukesh Kumar says:

Sir,
I am a new Zerodha trader. I am using Zerodha Pi software. I have some queries :-
1. How to create multiple market watches?
2. I used to draw my study on charts, I have saved the chart on drive. When I exit the charts, my study symbols, horizontal, vertical lines etc removed from the charts.

samir says:

Hello,
Can you add some more widely famous analyzing tool like TTM Queeze in our PI ?? And also one more suggestion regarding adding feature of live trade. One can see how many and how big trade are taking places in any scripts. Which is really very useful to buy/sell decision. Screen need to improve.

Ranjit says:

Sir

Are you providing dealer terminals ??

Rahul says:

Hi Zerodha team,

I am facing issue in market watch when i am login on desktop in any browser.

Its just now showing any value.its working fine mobile kite app.

Vijay says:

Are you planning to launch PI for mac as well?
I am not able to use it , as there is no version of PI is supported for MAC.

Yogesh says:

Hi,

I wants to know, is there any option on Zerodha Kite to see multiple charts on single window, if yes, please guide me.

abhradip says:

Is it possible that we can select the chart type such as candle or heiken ashi permanently on pi be cause every time i open it is in candle format and have change it if i want another one.

LifeWithPi says:

While selecting BSE scrips we are supposed to select the Group also A, B, XT, XD etc. What is the use of doing so ? First we have to find out the group to which the scrip belongs by googling it then feeding the same in Pi & then proceed.

Why cant the group get selected automatically ?

Ramakant Ramji Gaund says:

Dear Mr.Nitin Bhai,

I have account with you i wanted to coding with Cash v/s futures strategies so please help how to do that.

Thanks
Regards

Jayachandran says:

The stock screener option is very good. But do we have the stock screener for daily time frame. Are we planning to have it soon in near future

Akash says:

In pi software i can see all cds nfo nse bse bfo but where is mcx. After clicking the find the symbol i can see mcx but cannot click it. while opening my open i didnt open in all equity commodity and third one i dont remember is it cz of that but in kite i can see equity and commodity balance if i am not wrong this mcx comes under commidity. so why is it happening ?

Himanshu says:

Hello Nithin Sir, I am New to Zerodha ..I want to Place order for NSE DEC Future.. But I cant see,,,the option is Pi…I can do with kite …its there in kite,..but how to do in Pi ..

Poonam says:

Hi Nithin,

What does Convert Position button do? Can we use it for position roll over to next expiry series? Thanks,

Arpan says:

1. The order of scripts in market watch is changed every time I load a market watch or open Pi. I don’t keep scripts in ascending or descending order. Instead I keep them as per my requirement. Is there any solution for this?

2. Another problem is : suppose I’ve bought an option CE/ PE. Now when I try to exit that option by using “SELL” order, it rejects the operation saying “RMS: Margin Exceeds ….”. And to close that trade, I have to go to order book and have to “EXIT” from there. I know it happens due to margin issues but I am just trying to close an open position and not taking a Short Sell position. And because of that delay, I loose some points in profit ( EXITing a trade from order book ).

3. In Bracket Order, it changes given SL and Target after entering a trade. And then I have to modify them again to where I want to keep them.

4. In Bracket Order, we have to keep a buying trigger below cmp but what if I want to enter a buy trade above cmp. For ex. a script is forming a range and I want to buy when it breaks out of that range so want to keep a limit above cmp. Is it possible in Bracket Orders? (opposite for Short Orders ).

AMIT KUMAR says:

Sir,
Please introduce %age change in open interest in NFO Watchlist.

Amit

Bhalchandra Dattatraya Gijare says:

In default market watch I am facing the problem. After opening the MW it becomes in active. I cannot mark script for snap quote ,buy or sell order ,cannot sort columns . In short in live telecasting I am unable to use the Default Market watch.

Samir says:

hi
my account is activated 2 days back, i downloaded pi software,
but in market watch drop down only NFO option is showing and no bse, nse or other indices.
I filled the form for demat account in nse bse cash and FNO.
Please, guide.

apurva says:

can i use pi platform at internet speed of 512kbps ,also can i short sell the equity in intraday trading .

Raghavendra says:

Hello,

Instead of selecting scripts into Market Watch, I know BSE CODE for the scripts, I cant put them into a notepad and when I open the market watch all scripts as per the notepad should get listed/populated in the market watch.

Is there any alternative for saving time for script selecting from index list in market watch?

Mikhail says:

do you have a weekly chart on pi?

APOORV SRIVASTAVA says:

Hi! There is a feature I want in pi and if it is possible do tell me.

1) I want to open 1 min, 5 min and daily chart of a stock. Now suppose I want to see the same charts for a different stock, I need to open again these three windows individually for the different stock. What I want is whenever I select a stock to open its chart, its 1 min, 5 min and daily chart must be opened simultaneously in a pre defined layout.

2) A robust stock screener. You have a stock screener but we need to add individual stocks to it and it is definetly not robust. I need a 1 min intraday live stock scanner for scanning gap ups. Software called Investar has this feature and its definetly robust there.

UPENDRA BHANJA says:

I started trading through Zerodha kite few days back. I am on the loser side for constantly losing money. Today I saw that the chart is delayed by five minute on the market watch so could not pick out the trend all the time. Is it so that I am being provided a five minute delayed chart on kite. please help and confirm.

Regards .
Upendra

Bharat Thakkar says:

hello…the verbal alert is a very irritating feature of pi..only a beep sound is necessary..just as it is in nest trader..any idea if you are introducing beep alerts?

darshan says:

hi, i have my nse ac in zeroda, i need to see mcx crudeoil chart in pi, how can i see it?

Ashok Sharma says:

If anybody don’t known about groups, mean which stock is related to which group then he will be 100 % irritate.
so give a better solution of this bug.. Like Nest Trader.

Ashok Sharma says:

Dear Nithin

Perhaps There in Zerodha Pi is not an option of watch the 2 or more watchlist at a time, always requirement of load the created wathclist again and again, it is so irritated option.. In all software have this option at this time available in market, Please fix it.
and in chart .. there is MACD and MACD histogram is different option.. please combine them, then user can will have more space on screen to add another indicator.

Rajeev Menon says:

Dear sir,

It will be very useful if we have a price alert for multiple scripts. Say the price of a scrip = then we get a popup alerting that the condition/alert set by the user has been met

ITC has issued bonus which is why the you see the difference.

You can read more on Zerodha Circulars here: https://zerodha.com/marketintel/Circulars/

Summit says:

Dear Sir,
I had Developed an application to ease the life of traders but i need to integrate the real time data feed from bse and nse. Sir, Can u please guide me how can i get API.(Dont want to purchase the feed from NSE )

C L Dhavade says:

I am using pi latest version. Today after login market watch screen is blank. Script added yesterday are not visible. When I added fresh script it is not appearing on screen. Nifty/sensex meter is ok. Pl advise.

CL Dhavade
RC0317
mo 96190 67666

Milind says:

How to get pre-market price of 9:08 am in excel from Pi platform for select stocks?

Mukund says:

Hi, is there a quick way to get to a particular scrip in market watch – like a search function ?

Atul says:

In the market watch, drop down their is no NSE cash option it is only showing NSE future. How can i watch the charts of cash segment ??

Vishal says:

how do i create groups in market watch as i don’t want all the scripts in one place

Srikanth says:

Please provide universal search for adding scripts instead of drop down menu it takes lot time switching between all segments.
And also market watch is limited to only max 50 scripts.
So add multiple market watch so that different segments can be added in different pages with names.
As on nest plus we get tabs for market watch.
Even on kite u have multiple tabs for market watch then y not u update samething on pi I don’t understand.

shafiuddin says:

How to get Nifty option chain in my ZERODHA PI screen? In Nest trader it comes bottom of the screen. Please advise.

Latesh Narula says:

I want to know how to screen , all the stock simultaneous for a particular strategy .. and if the strategy matches the suitable stock(s) then .. it gets filtered too ..

Mana says:

After Market Closing Values in Market Watch Like ” %Change ” and ” Net Change ” are shown as Zero ,but in Options and Futures Values shown, But in Stocks it becomes zero after Market Close , so its become difficult to know that what happens in the Stock,please keep this values after market close

Tanmay says:

How do I view option chain, it is very painstaking to keep on adding each individual strike both in PI and on web.

Bobby says:

Hello Zerodha,
Sir there is no facility for saving screen layout, once we select multiple charts on screen by opening and dragging charts we are not able to save the same layout. Every time we login we have to repeat the same procedure. Kindly add some facility for saving screen layout or if there is already that facility kindly explain how to do it.

Thanks

Sathish says:

Hi Sir,

I am new to Zerodha.
I have two questions,
1. Is there any way we can list option chains of all strikes with option greeks in Pi or other tools. So that it will be easy to compare delta and easy to chose naked put to sell with lower deltas or applying Delta Neutral strategies.?
2. To open position for option strategies which requires multiple legs, how do we place order of all legs of strategies at one stretch?

Thanks
Sathish

Thilak says:

Hi, Iam not able to login PI. It shows below error
‘Not able to login. Please restart again to continue’.
I tried logout and login kite and pi. no luck
i tried restart my machine. no luck.
other question, do we need to login kite and Pi separately giving credential separately
Please assist.

Vipul says:

Why not add “NSE Smallcap Index” in market watch of PI ?
“Midcap Index” Value is not update at this time,Please fix it
Please Reply…

harsh*t says:

this had been the 1st day of trading, a wonderful experience, but found a thing missing in ADMIN POSITION – MTM, % change column is not there, which must be for easy calculation and observation on the market

John says:

Hi – I was told two weeks back that BO/CO would be enabled in the Kite platform. But till now no news??

Asha Modani says:

In market watch of Pi software I do not find the option for nse FNO only nse bse and BFO is available hence I am not able to transect in call option of stocks. Please advise solution

jay says:

hey!
I have activated from the admin to add 200 scripts in pi but still i cant add more than 50 scripts in market watch. plz help!

MITESH says:

Please add super trend indicator to PI and a black theme if possible at the earliest. PI has impressed me heavily a little changes and more customization to the user are requiered for high resolution laptops

MITESH says:

I would like to suggest that as indian indices can be added to the index bar if could provide with realtime live futures of DOWJONES, FTSE and SGX NIFTY live it would be a great job

A P Suresh Babu says:

I use ‘trade.zerodha’ platform. On this, at 9.15am, there is no way to know that the market opened. Only when the ‘% change column’ starts changing, we come to know that the market is opened. Any other indicator available on this platform to know that the market is opened.

sandesh jadhav says:

sir , how i can knew gainer /loser and volume breaker from pi software.

RH0408 says:

Hi Nitin,

The multiple tabs which we used to have in Zerodha Trader are missing in Pi. The problem is there is only one market watch but there is nothing like ‘Market Watch Group Settings’. It is creating some problem of juggling whole lot of scrips from one watch list to another.

chetan says:

when the chart window is popped out, we can’t place orders by pressing F1 or F2 on the pop out chart window. we have to navigate to the main window and place orders there. is there any way out of this? i prefer popout window coz i can make the chart smaller, the main default chart window is too big for me.

Rakesh Solanki says:

I am Trading with Pi Platform, I am not able to Understand How the admin positions are calculated.
Yesterday I was seen profit of Rs. 1100 on my Bear Call in Nifty and I Closed the trade but when I entered the trading data in my diary To my Surprise I knew that I have made loss of Rs. 1250. I totally depressed with this Admin Position Because It can confuse you a lot and Can Hurt any trader.

Is there any solution to see actual Profit/loss in real time on position taken on some days before Or I will have to do it manually every time which is very disappointing and not reliable in volatile market.

Please solve this query because it must be the problem of all traders, And after all it is the profit that is the aim of all trading activity if we are unable to find real time profit loss what is the meaning of online trading.

All other system in the Pi is very good and I am satisfied with it.

Thanks

Rakesh Solanki

Srinivas says:

Dear Nithin, Thank you very much for creating ZERODHA and running it so beautifully. My wife opened an account recently and it is very fast and transparent. Response from Zerodha team is very fast. Your model of Brokerage structure is the real motivation for small investors like us. Please keep it up. I have a few suggestions on extra features required on PI for a trader’s better reflexes while working on screen.
1) For Stochastics oscillator & RSI oscillator, at present we can select only ‘close’ price. Please introduce Open, High and Low price selections also from the drop down menu (as in SMA selection).
2) Please try to introduce two colors for a curve(eg, SMA curve), one color for upslope and one color for down slope.

PRASANNA says:

Hi Z TEam,

please dont bother to answer this as Shiva called me and solved the query. thanks.

I have never came across any brokerage house which is open to queries and so public about it.

Keep it up. Will never leave you.

PRASANNA says:

Dear ZTEAM,

Hi. I wish to bring to your notice that we save a particular workspace with charts and close it, When we open that particular workspace once again, it is supposed to open the charts saved within that workspace ( this was shown in the videos by your team on Youtube.) But in reality the charts screens though open do not show the charts. I have to open then using “Load the Charts from Screen”.

samiran adhikari says:

Is it compatible with windows 10? Many people like Amibroker indicators. Do you VWAP, in the chart section?

anukul says:

hi nitin,

In my PI software, i can only see MCX, CDS, FNO but where is NSE, BSE .
Please help me out.

Prakash V says:

Good job with Pi & Kite.. Really an awesome Trade Kit that you guys are providing.

Is there any chance that you could give the Market Watch Scrip limit to Users preference, I understand that you have given the limit for 50 Scrips Max for Stability factor. Lets say I would like to add 200 Scrips in which I filter with relative to the % change. I wouldn’t wanna add 4 work space and then try to filter. Lets say I got a powerful processor and good internet, wont that be enough to make things run in normal manner even if I got 200 scrips ??

My Suggestion : Just give Users the limiting number factor whether it be 20 or 500 , let users decide how many scrips to be placed depending upon their ability.

Viswanathan says:

Hi Nithin,
Does AMO, Pre and Post market orders work in PI?

Also any update on the following points on Kite
1) BSE Integration
2) Adding the Market Watch functionality (currently there is a limit of adding only 20 scrips)

Thanks,
Viswa

Vipul says:

Please add “NSE SmallCap Index” in Market Watch in Indices

Please Reply and fix it very soon

iTrade says:

Does Zerodha has CUSTOM stock screener?
I am using Kite but don’t find any such custom filter option to watch real time BSE/NSE market with any user defined filter criteria.

Thanks,
Sandesh

Vipul says:

How many time adding “Nifty SmallCap Index”, “NIFTY100 LIQ 15 Indx”, “NIFTY50 VALUE 20 Index”,“NIFTY GROWSECT 15 Index” in Market Watch in Indices ?

Please Reply and fix it very soon

Braejsh Kumar says:

How to create more than one market watch?

Vipul says:

Please add “Nifty SmallCap Index” in Market Watch in Indices

Please Reply and fix it

vmsudhakar86 says:

i have mt4,my template how do convert

shivasrinivas says:

Nithinji , is it possible to add live Open Interest changes for trading range stirke prices in pi , ie like
OI long/short build or OI long/short unwind detailed option chain … Thanks a lot in advance .

sunil says:

I am using pi software from last 6 month, why india vix is removed from market indices? where i watch india vix in pi? pls ans me its very imp indicator for my trades.

Shirish Khardekar says:

Sir

I am using Pi. I did some activities of buying and selling. But am not able to short sell. e.g. when I right click on chart of Powergrid, I get Buy here, Sell here. I click on sell here for short selling, my order is rejected, saying Reasons : RMS : Rule : Check holdings for entity account DS4748 across exchange across sec…..
Shirish Khardekar

sukanta says:

Thank you Nithin,

You are just extraordinary entrepreneur…

My new queries are

1. how can i save the layout of the screen.every time you log in ,I need to do the positioning .
if this is not included .

2. When we put buy order or sell order through chart, cant we modify the price.

3. when we put the order,by market watch screen, it will show in chart.

Sukanta says:

1. How to add blank row in between two scripts in market watch screen. (like in Diet Odin)

2. Nse cash scripts cant add.

please help.

Sukanta
RS7177

manish iyer says:

Hi Nitin,

I am using web base application kite.
but i am not able to create watch list.
but i was able to do using Z5.

is the feature of watch list still exist in kite ??

Regards
Manish iyer

Manjunath Shimpi says:

Hello Nithin,

I am new to trading and using you Pi software to learn. I feel it difficult to learn about Pi as there many blogs. Is there a quick user guide to understand the platform?

Robin says:

Hi Nithin,
1) Since Basket order is not available on pi, is it possible to place a BASKET order by logging in to ZT then log out…..and then log in to pi and continue trading ?
2) The orders entered thru ZT can be accessed and modified thru pi….right?
3) Basket order thru a chart is difficult…but can basket order be included as a normal feature in pi (not for placing orders thru charts)…..pls consider this in the next revision of pi.

arya mishra says:

Hi,
I have a suggestion for zerodha pi.
“when we are arranging tabs thats a good thing. But it will be good to have feature if we double click the tab it should maximize and again double clicking, it should restore back to original states.”

Pradeep muthappa says:

Dear Nitin,
I have a few questions:
1. Options calculator in Zerodha Trader doesn’t work, despite fixing all issues as explained in your website/msg board.
2. When pricing options using B&S model for Nifty index, should i input the Nifty Underlying price or Nifty Current Month’s Future price.
3. Can i hedge a stock by buying the futures of that stock instead of the underlying?

Saju says:

Hi Nithin
I have only trading account, may be because of this reason iam not getting nifty index and equity stocks in marketwatch of Pi. now i can trade only in futures and option, but that also very difficult to trade without nifty chart. pls give me a solution for this problem.
Thank you.

Ritesh says:

Wondering if I can get the video of the webinar conducted today afternoon? I didn’t received any email from zerodha with the details, though yesterday a message was flashed on the ZT screen regarding this webinar.

Further, reg Pi, Is it possible to create multiple market watch with different names? for e.g. three market watch’s and each having 12 to 16 scrips?

Subramaniam says:

How to place Basket orders in Pi?

I trade nifty and bank nifty. but chart on PI is limited for 3 months hence not useful as ZT was, also in ZT “save as default templet” is missing, which was very much required,

mk says:

Hi Nitin,

Just started using the PI platform. First experience is excellent!!! Haven’t spend much time yet with the tool though. Would like to recommend couple of additions for your considerations –
1. Can we add ‘Column-Click-Sorting’ to Order & Trade Book grid as well like we have in Marketwatch?
2. Excel based import for Orders in Order Book

Thanks,
Moushmi

Anand says:

Hi Nithin Sir,
There should be provision to change the trigger price in cover order, more than entry price in long or less than entry price in short, when market is in our favour, trigger price will be lower than current market price but can be more than entry price. please make provision in pi

J S says:

Nice Products, Thank You.Team

ashockkumar says:

How about having more than one marketwatch in Pi as used to be in Zerodha Trader as its very difficult to see all the scrips i chose and has to scroll down or up

Pushp says:

Hi Nithin,

Very weird restriction i see in PI and in fact in all your interface.
I just have F&O account (No Cash Account). Hence I am unable to add any Cash scrip in my watch list. By the same logic I can not open historic chart of any scrip and perform technical analysis. Since Futures contracts are of only 1 month duration, I can at best see last one months chart history for current contract of the scrip (e.g. RELIANCE JUN 30 FUTURE). Even I can not backtest over horizon more than 1 month. Backtesting for short period of 1 month is useless exercise.

Using rule based alert is impossible.

Anyone trading in F&O would also generally follow the scrip in cash market and do just trade in F&O for various reasons. By not having access to cash price history, my utility of PI has just reduced to Zero.

anil says:

in pi software minimam 2 market watch side open

and 100 scrips are open.

RH0650 says:

Hi Nithin,

I have recently opened an account with Zerodha. Just needed to clarify a few points before I start trading.

Can stocks other than the 236 listed here (https://zerodha.com/margin-calculator/Equity/) also be traded using the MIS product? If yes, I understand there would no leverage provided on these. Also can we short sell any stock (236 and others) using the MIS product?

Also, if I want to buy a stock and sell it the very next trading day, please confirm if this would be possible using the CNC option.

Based on one of the conversations above, I understand that we can trade intraday using the CNC option with the charges levied applicable to an intraday transaction. So, the advantage of the MIS option is mainly to provide leverage on the 236 stocks listed here (https://zerodha.com/margin-calculator/Equity/). Is my understanding correct?

Best regards,
Harsh

Ganesh says:

Hello Nithin

I have been using PI since last couple of weeks it is working like charm, Appreciations for Zerodha.
Please find below suggestion.

Suggestion : Improvement in Admin Position

Used margin should be displayed in Admin position next to the scripts.
When can we expect kite ?

Best Regards
Ganesh

bipin says:

when i use cnc y m2m is showing profit/loss and i get confuse if i do mis with same stock then it get confusing .is anything i can do to see real profit and loss of intraday trade

shivasrinivas says:

hi nithin,
when i use shortcut like f8 for trade book or f3 for order book , instead of zerodha pages , its displaying volume increase , decrease or change to tabs in system ( ie other opened programs in lap).

for bracket order brokerage is the same as 20 per order?

thanks

Anand says:

Hi Nithin,

where is “position conversion” option not to be seen in any of the panels?

thx
anand

snag1976 says:

There is no option for getting price alert till now. can u tell us for how many days we have to wait for this?

ManishAstral says:

I’m getting quite fond of Pi as its very neat and elegant. But there are some issues which i would like to mention, and i believe they have been also asked above.

1. Add an extra column in Market Watch which shows the candle for the current day using the open, high, low and LTP prices for that day.

2. Daily charts doesn’t work properly as it doesn’t allow zooming, panning, or scrolling on any sides, the number of candles doesn’t seem to affect it . Also using 8 interval hours chart crashed Pi randomly.

3. Daily charts should also show the current trading prices instead of the price from the last trading day, and if possible get updated realtime.

4. Add the ability to view Weekly, Monthly, Yearly charts.

5. In Stochastics Indicator , there should be an option to change the OB and OS level and also the colors and thickness of the K and D line.

6. Very important , add a crosshair and put all the values in one corner of that specific screen or frame. This helps a lot as the prices can be quickly viewed by moving the crosshair instead of holding down the mouse and then hovering it on each candles. Putting the values in one corner also makes it very neat.

7. Add an option to put the volume right in the bottom of the price frame instead of showing it in a separate frame.

8. Ability to create multiple market watch screens. Instead of only 1 thats available by default.

9. Ability to highlight stocks manually in the market watch screen, by using colors, bolder fonts, or maybe even a sticky tooltip that just reads “IMP” or “HOT” etc.

Apart from the above issues, Pi is already becoming an ideal tool to trade, and is very adorable. Thanks to Zerodha for their effort in giving this modern tool in the hands of the traders.

RK says:

Hi,

Some of the Lot size for nifty future stocks like Asian paints ,Hindunilvr,Lupin etc are showing wrongly in Pi as 500,500,250 instead of 250,250,125 and it is also reflected in order window, hence order size has to be entered each time. kindly check the error and update.

Thanks

Saranjit says:

When will you introduce Basket orders (and AMO Basket orders) facility in Pi?

Tushar Chaudhari says:

Hi Nitin,

I used PI for couple of weeks for MCX.
I have following feedback for PI and Zerodha as well. Some of it has already been asked by many people across different Z-connect blogs. I am still repeating it.

1. Zerodha is good for full time traders only who can access their terminals during daytime. For working professionals like me,facilities like bracket orders and cover orders are proved to be of no use since we cannt use them in the night/Ah. It is bare minimum facility if you want such type of traders to succeed. Otherwise, we may only become a long term investor with Zerodha account. I suggest it should be done at the earliest. It is as critical (probably more) as charting tool PI.

2. If it is difficult for you immediately, I will suggest you to give ‘Order sets Order’ & ‘Order Cancel Order’ facility, which I feel will give more flexibility for a trader to use it and could be easier for you to give. Else, a facility to place trailing stop loss order, after taking the position will also be useful.

3. Valid Till Date Order is also required to be given else, we will have to find unfilled orders daily and place them again on daily basis, if we are waiting for a scrip to come in our entry zone.

4. PI – Daily chart is not working on MCX. If I open 8 Hours chart, then hardly, 2-3 candles appear on the chart. I cannt even zoom out to fit more candles on that screen. So, I cannt analyse a long time frame and I am forced to become a very short term trader for same.

5. I read somewhere, PI can show upto 50000 candles, but, even if we open daily time frame, drawing 100 candles is denied by the software. We can progressively open more candles for smaller time frames. However, I found that whatever number of candles I am entering for smaller time frames, it only shows as 50 – 100 candles that fit on the screen and , zooming out or scrolling left/ right to see more candles doesn’t work.

6. Need to provide more EOD charts, weekly & daily, at least.

7. We should be given to edit/ define the cover order Stoploss range at the time of ordering itself. Also, trading from chart screen can also have an option to place cover order by click of a mouse.

8. If MCX does not allow bracket orders in commodity, cover order with a flexibility to define the limit price will help eliminate the need of Bracket order upto some extent.

Though, I appreciate the progress Zerodha has made in a short span of time, however, there is still a long mile to travel.

Tushar Chaudhari

Murali says:

I want stay connect with zerodha continuously, what to do

Anirudhra says:

Hi,

I wish we have an option of having multiple market watch windowns in place & option to add more scrips.

As of now, we keep different MW windows for different segments like Fut’s & Options with other brokers, that makes things easier to analyse.

And, we deal with more than 75+ scrips inlcuding all the segments, when can we expect to add 50+ scrips?

Chinmay Sarupria says:

Hi,

I am getting a problem in Pi. Please see the image.

Chinmay Sarupria says:

Hi,

Yesterday I installed Pi but there is a issue, I can’t add NSE and BSE stocks. I only get 3 options in dropdown – NFO, MCX and CDS. I just can’t find a way to add NSE, BSE stocks. I have seen your video – Pi Overview. You get 6 options in dropdown but I’m getting only 3.

Hushaam H.S. says:

Hi,

May kindly see the attached screenshot which itself is self-explanatory.

Abhijit Roy says:

Hi Nitin,
I am using Zerodha Pi for options trading. I am just a beginner, so I need to ask this: how to use crosshairs on the intraday futures chart in Pi? Crosshairs would very helpful for entry and exit.

vikas says:

Hello,

How can we export market watch list to excel ?

Manik Mehtani says:

Do you have a trading software for MAC users

Fawz says:

sir,

how can i save the layout of the screen.every time you log in ,you have to do the positioning .
if this is not included . i have a suggetion to include it in the coming update

regard
fwz

Senthil says:

Hello Nithin

I have been using PI since last two days it is working like charm, Appreciations for Zerodha & Tradelab Team. Please find below suggestion.

Suggestion : Improvement of Market Watch

During trading hours whenever a script test low or high price it should indicate COLOR in low and high column of respective script. It will be good for trader to easily understand in market watch screen that which scripts are test low and high.

Senthil

maheshwar says:

Hi Nithin,

Just wanted to bring to your notice, today I went long on Jindal Steel F&O for 1 lot but was shocked to see a negative of Rs.1,62,000.00 within minutes on MTM on admin position causing panic & almost a heart attack ;), not knowing what to do I squared off immediately & checked admin position again & the loss showed Rs.500.00…..must have been some sort of glitch, spoke to customer care & confirmed all was fine with my account. let me know if you need my id & i’ve also saved a screenshot of this in case you guys need.

Senthil says:

Hello

I installed PI, Kindly guide me how to add a blank row in market watch.

senthil

Rohit says:

HI,

How can i see all my open position(not admin positions) in PI. As of now I can only see them in the back office login. In admin position I can see the positions only for today’s price or based on today’s changes but not the price on which I bought 3 days back. Stock holding doesn’t show me anything.

Ajay mittal says:

hello team,
when we modify orders , in order book Prices are changed , but update time doesn’t changed.

Rajesh Rathod says:

hello

I how can view option chains in zerodha pi just like zerodha trader as it is very useful tool for option trading.

NARSIMHA says:

hi,actually i want to learn backtesting,alerts.ofcourse ther r blogs in z-connect&various websites but i couldnt learn,i had mailed this to karthik,he said he wil cover in T.STATEGIES but by then it will be too late as an a.trader i cant waste time,so i recqest u to tell someone&call to teach indetail,i strongly beleive the need will be fulfilled by only GREAT ZERODHA

Shubhangi Pavtekar says:

Hello Zerodha Team,

Would like to highlight 2 more points for improvement, Adding multiple frame actually wont help in terms of operation. please find below image where all other buttons do not shuffle as per screen or resolution.

IT become bit difficult to manage trade with congested screen since it do not auto adjust nor we have on screen modification functionality.

Adding additional point for on chart trade from previous comment, Need pre-fix setting for Buy, Sell, Stop loss and exit over chart. i.e. user should get setting option to define Buy at market at Limit, Sell at Market or Limit, Exit at Market or Limit and Stop loss at Market or Limit. Logically it make no sense to provide these options when some one is executing trade at best practices and predefined targets.

But these are more helpful when trading over 2 – 3 candles.. 🙂

Thanks in Advance…

Shubhangi Pavtekar says:

Hello Zerodha Team,

1 – I would like to know if you have any feature or option under Zerodha Pi to make better use of multiple screens? How it would be helpful.

2 – I want to know if you could provide simple Selective options for Buy, Sell, Exit and Stop loss on Chart ? Since existing option do confuse many times during fast trading execution. It would be excellent (since it is already better than anything) if you could introduce editing order on chart (on the move) itself rather than editing separately through order book.

3 – We want feature to auto save chart drawings, it should also include include order executed through Chart. many times we faced issue where we identify chart patterns, make drawings, execute order through chart based on drawings n sudden unexpected crash of Pi or hung force us to exit and everything get ipe out on next login.

NARSIMHA says:

sir yesterday i got sms to install new PI &delete old PI what is this,what r extras&till how much time u will be upgrading when will we hav COMPLETE,FULL PI where we can competate