How to Recover Data from Dead SSD? (2024)

Can data be recovered from an SSD?

SSDs are gaining a lot of popularity these days due to their quick processing rate and instant boot-up capabilities. But just like ordinary hard drives, they are also prone to different types of damages. If an SSD gets damaged in some way, the results can be catastrophic, since we rely upon computers for the safekeeping of our important data. In such a scenario, different techniques may be used to recover data from dead SSD. An overview covering different aspects of such a data recovery is given in the sections below.

Common symptoms of a dying SSD

Existence of bad blocks Just like bad sectors on the typical HDD, an SSD may develop some bad blocks due to certain reasons. Consequently, it takes a longer time to perform simple read or write operations. Sometimes the PC generates an error message saying it requires being repaired. Sometimes your active applications start crashing or freezing up as well.

Files can't be accessed/written Upon detection of a bad block, the system sometimes declines to read or write some data. In case the bad block is detected before the data is written, your files stay free of any damages. On the other hand, if the block is detected after the data is already written, there is no way to access it without performing data recovery.

File system requires a repair Such type of messages tends to appear in both Mac as well as Windows operating systems for different reasons. In most of cases, they come up as a result of losing port connection or due to the development of bad blocks.

Frequent boot crashes In case your PC tends to crash in the middle of the boot up, there might be a bad block on your SSD. It is strongly recommended to take a backup of your data before the drive gets dead for good.

The SSD becomes read-only In rare cases, the SSD becomes read-only. It becomes impossible to write any new data, but the existing data can be read properly. That’s another sign of the drive getting damaged.

The Best SSD Data Recovery Software

There are numerous SSD data recovery applications available on the Internet. Rather than relying upon a mediocre product, it is strongly recommended to benefit from the Recoverit SSD recovery tool, one of the best of its kind. It is a high-end product that offers a variety of several powerful features. A few of them are given below.

How to Recover Data from Dead SSD?

Free download and install Recoverit Data Recovery on your computer, follow the next steps to recover data from dead SSD on a Windows computer. If you are working on Mac, you can download Recoverit Data Recovery for Mac and follow similar steps.

Video Tutorial on How to Recover Data from SSD

Step 1 Select The Solid-State Drive

Launch Recoverit Data Recovery on your computer. To recover data files from SSD, you need to select the SSD to start.

Step 2 Scan the SSD

After selecting the solid-state drive, and click the "Start" button to start scanning the lost data and files.

Step 3 Perform a Deep Scan

Recoverit software will start to scan the lost data from SSD. After the first scan, if you cannot find your files, you need to scan with the "Deep Scan" mode, which will search for more files from the SSD.

Step 4 Preview and Recover Data

After the scan, you can check will recover files from SSD. Preview some recovered photos, select your files, and click the "Recover" button to saving them on the computer hard drive or another safe storage device.

Download Recoverit Data Recovery to help you retrieve all data back. While you get all data back from SSD, you should take your SSD to the repair store to fix out the problem.

4 Tips to Repair a Corrupted SSD

After the dead SSD data recovery, you can go to fix the dead SSD. Follow the next simple way to fix out the dead SSD.

Solution 1: Update SSD's firmware

To update the firmware of the dead SSD, follow the instructions listed below.

Solution 2: Update your Windows drivers

When the file system installed on the SSD gets damaged and corrupted, it might indicate your Windows drivers are outdated. Update them with the help of the below instruction.

Solution 3: Run CHKDSK to Repair Dead SSD

Solution 4: Format the SSD

If none of the methods introduced above fix the issue, you can try formatting SSD to repair it. But all the files will be removed after formatting, you need to ensure all the data has been backed up.

Usually, the dead SSD can be fixed by updating SSD firmware or Windows drivers. What you need to note is to take good care of all data stored on the dead SSD when you take these two measures to fix it. Although Recoverit Data Recovery can help you retrieve lost data back from a hard disk, it is proposed that you avoid losing data once again.