How to Fix Candle Tunneling & Burn Your Candle Evenly | Prosperity Candle (2024)

Thanks for reading this post... we hope it's helpful! And we hope you'll also check out our currentbestsellers andnewest candle designs. Stay tuned, more to come in 2024!

---

Container candlesare a home decor staple, but what do you do when that beautiful candle doesn’t burn evenly, creating a “tunnel” down the center? No worries! We’ve got you covered on candle care 101: how to fix candle tunneling.

What Is Candle Tunneling?

How to Fix Candle Tunneling & Burn Your Candle Evenly | Prosperity Candle (1)

Candle tunnelingis when only a small circle of wax melts around the wick while your candle is burning, instead of across the entire surface of the candle. It typically means some wax is wasted, plus over time as the tunnel deepens it can become impossible to light the wick.

Sometimestunneling results from an incorrectly made candle with a wick that is too small for the size of the container, but more often it is caused by a first lighting that is simply too brief. If a new candle is lit for a short time that doesn’t allow for the melted pool of wax to reach the edge of the candle’s edge, a barrier is created that will remain on subsequent lightings.

This is called a candle’s “memory.” It happens because previously melted wax is softer and takes less heat to re-melt again compared to wax that hasn’t been melted yet, so when you re-light your candle the wax is melting at different rates which results in a tunneling effect.

Disappointing, right?Not only is tunneling unappealing, but it also reduces the burn time of your candle because only a small portion of the wax is consumed. So how can you fix candle tunneling and enjoy your candle for longer?

---

Did you know that we now offer Bath Soaking Salts and Sugar Scrubs, all blended by hand by the same artisans who make your candles? Also super nice, reusable totes!

---

How To Fix Candle Tunneling

How to Fix Candle Tunneling & Burn Your Candle Evenly | Prosperity Candle (2)

The basics ofcandle care include how to burn a candle evenly to prevent tunneling. We recommend that each time you light your candle, let the wax melt to the edge of the container (or nearly so). This is especially important the first time you light a new candle and usually takes 1-2 hours depending on the size of the candle’s surface.

If yourcandle still shows signs of tunneling, there are a few things you can do to fix it. First, for safety, this is a good moment to remind ourselves to never leave a burning candle unattended, and of course to be mindful of pets, children, drafts, and anything nearby that could catch fire. It also helps to trim your candle wick to ¼ inch before each lighting (acandle wick trimmer works best) as this enables a cleaner, more consistent burn. Please be safe!

The Hair Dryer Method

Ourpreferred method for fixing tunneling is to melt the entire candle surface with a hair dryer. First extinguish the flame if lit, then use a hair dryer to carefully melt the wax to the edge of the container. Use a low setting and hold the hair dryer far enough away to avoid spattering any wax. The goal is to remove the “memory” so that the next time you light your candle, the pool of melted wax will reach the container’s edge (or nearly so).

The Aluminum Foil Method

Anothercommon way to fix candle tunneling is to use aluminum foil, pictured above, to reflect heat back down to the candle’s edge to aid in melting the wax. This method may take a few tries to get right and the foil gets hot, so be careful to let it cool before adjusting or removing it. Using one or more sheets, wrap foil around the outside of the candle so that the top extends inward over the unmelted wax like a roof while leaving the center open for the flame. After 1-2 hours of burning, your candle surface should even out with a pool of melted wax that reaches the edge of the container.

The Wax Method

Athird way to fix a tunneling candle is to scoop out the unmelted wax with a spoon until it is the same height or lower than the middle part that melts, thereby removing the “memory”. When you then light the candle, be sure to let it burn long enough for the pool of melted wax to reach the edge of the container. Also, be sure to wipe clean the spoon with a paper towel and dispose of all wax in a waste bin… wax can clog a drain!

---

We are also planning to expand our Reed Diffuser and Room Spray collections which have been popular gifts for family, friends and colleague who may not be candle people.

---

PracticingCandle Care

Weare true candle lovers who enjoy how candles fill a room with a peaceful glow and a nice scent. There is nothing better than a well-crafted candle for ambiance, whether during a special gathering, a relaxing evening in, or while taking that much-needed soak in the bathtub. With the proper candle care, your candles will burn beautifully in your home. To help out, we’ve created a list of 5 tips for candle care and maintenance to keep candles burning cleanly and evenly, and recommend these candle care accessories.

Andwhen it’s time to say goodbye to your favorite candle, you might find creative ways to repurpose the container. Check out these tips for reusing your candles - and please leave your favorite repurposing ideas in the comments below!

How to Fix Candle Tunneling & Burn Your Candle Evenly | Prosperity Candle (4)


Learn More About Our Mission

In every product lies the opportunity to help make the world a better place.

Our handmade candles and ethically sourced giftssupport women artisans in the U.S. and refugee families around the world.
Learn how.

How to Fix Candle Tunneling & Burn Your Candle Evenly | Prosperity Candle (2024)

FAQs

How to Fix Candle Tunneling & Burn Your Candle Evenly | Prosperity Candle? ›

Using one or more sheets, wrap foil around the outside of the candle so that the top extends inward over the unmelted wax like a roof while leaving the center open for the flame. After 1-2 hours of burning, your candle surface should even out with a pool of melted wax that reaches the edge of the container.

How do you fix a severe tunneling candle? ›

Use aluminum foil to fix a candle that has started to tunnel

Poke a hole in the middle at least an inch wide so that the flame gets enough oxygen to burn. Allow the candle to burn long enough to melt the wax to the edge of the container. The aluminum foil helps hold in enough heat to melt the entire surface of wax.

Can you microwave a candle to fix tunneling? ›

Set your oven to 80 Degrees Celsius or 175 Fahrenheit. Once hot, place your candle in the oven for 2 minutes. This will evenly melt the top of your candle and return it to its smooth, and even former glory! NOTE: Do not put your candles in a microwave oven!

How to fix a buried candle wick? ›

If your wick was buried, use a pair of tweezers or a Q-tip to nudge the wick back to an upright position, making sure it sticks out above the surface of the wax. Hold it in this position until the wax cools.

Do candle toppers help with tunneling? ›

Why should you use a candle topper? Our Candle-Saver™ Brand Candle Toppers add style to both lit and unlit candles while helping them burn more evenly. Made in the USA of hand-finished steel, they reflect heat to melt wax uniformly. This prevents wasteful, unsightly tunneling and coring.

Can you put a candle in the oven to fix tunneling? ›

Heat the top layer of wax with a hair dryer to fix minor tunneling. Put your candle in the oven at 175 °F (79 °C) for 5 minutes to help melt the wax. ​​Cut away the excess wax above the wick with a butter knife.

Does a candle warmer fix tunneling? ›

1.) Use a candle warmer - a candle warmer will gently heat up the bottom of your tunneled candle, releasing gentle fragrances and making the most of your otherwise un-light-able candle. 2.) Carve out some wax chunks - a tealight warmer is another great option!

How to stop homemade candles from sinking in the middle? ›

There are techniques you can use to try to avoid sink holes such as:
  1. Heating the glass before pouring. As the wax cools, it contracts and holds onto the wick and the glass, thus creating the cavity. ...
  2. Poking relief holes as the candle is cooling also helps to prevent the air pockets from forming.
Sep 25, 2020

Why are my homemade candles tunneling? ›

Irregular burning practices: Candles should always burn for long enough so that the wax pool has enough time to reach the edges of the candle vessel. Extinguishing a candle too early may lead to the formation of a tunnel.

What to do with candles when the wick is gone? ›

In the event that the wick is actually broken and impossible to use again, consider some DIY options so that you can continue using your candle as normal. Jones recommends using twine or even tightly rolled-up newspaper in place of the wick as makeshift alternatives.

What causes candles to tunnel? ›

Incorrect wick size: A very common cause of tunnelling is the usage of a wick too small for the volume of wax or the width of your vessel. A wick which is too small may, despite its best efforts, not have enough power to burn the wax from edge to edge.

Top Articles
The Best Password Managers for 2024
Medium of Exchange
Elleypoint
Gomoviesmalayalam
Citibank Branch Locations In Orlando Florida
Santa Clara College Confidential
Jennette Mccurdy And Joe Tmz Photos
Overzicht reviews voor 2Cheap.nl
Call Follower Osrs
Why Is Stemtox So Expensive
Syracuse Jr High Home Page
Craigslist List Albuquerque: Your Ultimate Guide to Buying, Selling, and Finding Everything - First Republic Craigslist
Highland Park, Los Angeles, Neighborhood Guide
Blackwolf Run Pro Shop
Soccer Zone Discount Code
Nine Perfect Strangers (Miniserie, 2021)
Epguides Strange New Worlds
Shopmonsterus Reviews
Nz Herald Obituary Notices
Hefkervelt Blog
Hesburgh Library Catalog
Soul Eater Resonance Wavelength Tier List
Harbor Freight Tax Exempt Portal
Truvy Back Office Login
Craigslist Northern Minnesota
Turns As A Jetliner Crossword Clue
Craigs List Jax Fl
Craigslist Sf Garage Sales
Poe T4 Aisling
Bfri Forum
Spy School Secrets - Canada's History
Why The Boogeyman Is Rated PG-13
Avance Primary Care Morrisville
Austin Automotive Buda
Troy Gamefarm Prices
Cbs Fantasy Mlb
Craigslist Gigs Wichita Ks
3496 W Little League Dr San Bernardino Ca 92407
Orion Nebula: Facts about Earth’s nearest stellar nursery
Conroe Isd Sign In
20 bank M&A deals with the largest target asset volume in 2023
How to Print Tables in R with Examples Using table()
Newsweek Wordle
Shell Gas Stations Prices
Vérificateur De Billet Loto-Québec
Child care centers take steps to avoid COVID-19 shutdowns; some require masks for kids
Online College Scholarships | Strayer University
St Als Elm Clinic
About us | DELTA Fiber
Gummy Bear Hoco Proposal
Koniec veľkorysých plánov. Prestížna LEAF Academy mení adresu, masívny kampus nepostaví
Latest Posts
Article information

Author: Greg O'Connell

Last Updated:

Views: 6361

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Greg O'Connell

Birthday: 1992-01-10

Address: Suite 517 2436 Jefferey Pass, Shanitaside, UT 27519

Phone: +2614651609714

Job: Education Developer

Hobby: Cooking, Gambling, Pottery, Shooting, Baseball, Singing, Snowboarding

Introduction: My name is Greg O'Connell, I am a delightful, colorful, talented, kind, lively, modern, tender person who loves writing and wants to share my knowledge and understanding with you.