When setting up a new network for your machine, it’s important that you enter the correct IP information – in order to get your Amphion device connected properly, you’ll need to provide DNS IP address information for the network your Amphion is connected to.
This information can be entered in the Remote Service Platform, under the Network Creation page.
There are two ways to determine your DNS information:
Discover your DNS servers
Consult your IT professional
1. Discover Your DNS Servers
In order to find your local DNS server address, perform the following steps listed below.
Please note: If your computer is not on the same local area network as your Amphion device or you are not sure, ask your local IT department for this information (see the next section, “Consult Your IT Professional”
Open your Command Prompt from the Start menu (or type “Cmd” into the search in your Windows task bar).
Next, type ipconfig/all into your command prompt and press Enter.
Look for the field labeled “DNS Servers.” The firstaddressis theprimary DNSserver, and the nextaddressis thesecondary DNSserver.
2. Consult Your IT Professional
If you still don’t know your DNS information, or your computer is not connected to the same network as the Amphion you’re seeking information for, speak to a qualified IT professional at your location for assistance with finding this information.
All of these files are located in the %SystemRoot%\system32\Dns directory, and all except the dummy boot file are built from standard resource records. A name server boot file points to sources of DNS information.
Using nslookup online is very simple. Enter a domain name in the search bar above and hit 'enter'. This will take you to an overview of DNS records for the domain name you specified.
The Domain Name System (DNS) is the phonebook of the Internet. Humans access information online through domain names, like nytimes.com or espn.com. Web browsers interact through Internet Protocol (IP) addresses. DNS translates domain names to IP addresses so browsers can load Internet resources.
DNS settings are specified in the TCP/IP Properties window for the selected network connection. Go to the Control Panel. Click Network and Internet > Network and Sharing Center > Change adapter settings.
To do a DNS lookup in a Windows computer, go to Start, then Run, and type command to open the command prompt.Type nslookup as the DNS lookup command and hit Enter. Your search will bring back information about your local DNS default server and IP address.
From the Windows desktop, open the Start menu, select Windows Administrative Tools > DNS. Select and hold (or right-click) your server, and then select Properties. To limit the DNS server to use a specific IP address, select Only the following IP address, select the IP address you wish to use, and then select OK.
By default, your router uses DNS servers set up by your internet service provider. All the devices on your network — computers, smartphones, tablets, games consoles, and anything else — use your router's DNS server.
The Domain Name System (DNS) is the phonebook of the Internet. Humans access information online through domain names, like nytimes.com or espn.com. Web browsers interact through Internet Protocol (IP) addresses. DNS translates domain names to IP addresses so browsers can load Internet resources.
Hobby: Shopping, Table tennis, Snowboarding, Rafting, Motor sports, Homebrewing, Taxidermy
Introduction: My name is Duncan Muller, I am a enchanting, good, gentle, modern, tasty, nice, elegant person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.