How much should I fill my washing machine? (2024)

FAQs

How much should I fill my washing machine? ›

You have a medium or regular load if the drum is around half full, for a large load you'll have to fill it until three-quarters full, and if you have even more laundry to do, fill it up until you can fit your palm between the wall of the drum and your clothes.

Even a large load of laundry should not fill the washer tub more than three-quarters full. For a front-load washing machine, pile clothes up high, but don't cram them past the last row of holes at the front (the row closest to the door). For a conventional top-loader, don't load clothes above the agitator.

So here's the palm trick you could try every time to check if your machine is overloaded: Just place your hand into the drum—it's easy as that. If your hand fits between your clothes and the wall of the drum, then you have the perfect load size.

When you load the clothes, you should be able to fit one hand into the top of the drum. If you can't, take out something. If there's too much space, add something else or consider waiting until you can do a full wash.

Always run a full load of laundry

Washers and dryers use about the same amount of electricity to wash a small load as they do a full load. So, it's more efficient to wait to do laundry until you have a full load, but remember -- don't over-stuff your dryer.

ROUGHLY 7 SHIRTS, 5 PAIRS OF PANTS, 10 TEES, 4 PAIRS OF SHORTS, 5 TOWELS, 20 SOCKS, and 15 UNDERGARMENTS.

You have a medium or regular load if the drum is around half full, for a large load you'll have to fill it until three-quarters full, and if you have even more laundry to do, fill it up until you can fit your palm between the wall of the drum and your clothes.

If you under load your washer, the clothes will accumulate on one side of the drum and bang against the frame when the machine reaches its spin cycle. This is going to throw the washer out of balance and will result in excessive vibrations and vigorous banging noises.

If you overload the drum, the machine will still use the same amount of water. So there won't be enough water to wash the extra clothes you put in. As a result, your clothes will come out without being properly cleaned. The water might not reach some clothes at all, if they're tightly packed.

How do I know if my washing machine is filling with enough water? ›

The washer will partially fill with water and the drum will rotate during the initial fill. Once the initial fill is complete, the wash portion of the cycle will begin and the tub will fill will more water. At this time, the water in your washer should be about the same amount as the image below.

Make sure you get the dose right for your fully-automatic washing machine, generally: A front load fully-automatic washing machine needs 60 ml of liquid. A top load fully-automatic washing machines need 80 ml of liquid.

One of the primary ways HE washers get clothes clean is through the wash action. Top-load washers with impellers and front-load washers use less water and rub clothes against each other. Lower water creates a higher concentration of detergent which improves cleaning.

If you overload the drum, there will be less water available for the detergent to dissolve in as the clothes will soak this up. We therefore recommend that you leave a hands width gap at the top of the washing machine drum when loading. This roughly equates to filling 3/4 of the drum.

Your washing machine is designed to keep some water in the drum when not in use. This helps ensure your water pump doesn't dry out and overwork the next time you run a load of laundry. You shouldn't be able to see this water — you'd likely only hear the water in your washing machine when you spin the drum.

So how full should your washer be? Better Homes and Gardens suggests, "Even a large load of laundry should not fill the washer tub more than three-quarters full." They also point out that if a load is too heavy it can damage the items on the bottom.

the machine isn't supposed to fill all the way based on the design. the wash plate at the bottom of the tub wouldn't be able to interact with the clothes if the machine filled all the way.

If you overload the washing machine, clothes won't be free to move around and get clean, because they can't be properly soaked in water and laundry detergent. In addition, when you overload your washing machine, the washer adds extra stress to the motor and the tub bearings and you could damage your appliance.

A medium load of laundry is when the tub is approximately 1/2 full or 2 pounds of laundry per cubic foot of the washer's capacity. A large load of laundry is when the tub is approximately 3/4 full or 3 pounds of laundry per cubic foot of the washer's capacity.