The waste circuit board recycling equipment (also called pcb recycling machine) is mainly used for the separation of metal and non-metal in materials such as waste circuit boards, copper clad boards, circuit boards and trims. For PCB processing, there are two recycling ways:
1. Dismantle the electronic components first, then recycle the components and clean motherboards separately; For some valuable components such as CPUs, RAMs, Memory Chips, you can further extract gold/silver and other precious metals. And, for the clean motherboards, after crushing and separating, you can get pure copper and resin powder.
2. Crush the circuit boards directly without removing the electronic components. After dry crushing, the waste circuit boards will be pulverized into a mixture of metal and resin fiber. Finally, the metal and resin will be separated by a high-voltage electrostatic separator. Then, the separated metal and non-metal can be sold directly for reuse.
The circuit board usually contains 30% plastic, 30% inert oxide and 40% metal. The main direction of recycling the waste circuit board is metal recovery. The metal contains about 20% copper, 8% iron, 2% nickel, 4% tin, 2% zinc, and precious metals such as about 0.1% gold, 0.2% silver, 0.005% palladium. The recycling price of the waste circuit boards varies according to the structure, generally ranging from 2000-18000 yuan ($28-$2600). Our circuit board recycling equipment can recycle metal and scrap metal inside, which can be sold to make money. Among them, the price of copper is around 38,000 yuan ($5400) per ton, the price of iron is around 1000 yuan ($145) per ton, and scrap metal fiberglass and resin powder can also be sold for additives and filling materials, and the profits are considerable. Comprehensive calculation, for recycling one ton of waste circuit boards, the profit is at least 1,000 yuan ($145).
Suny Group's PCB Recycling Machine is dust-free and green. For the price and profit of recycling and processing waste circuit boards, it is not fixed. After all, there are many types of waste circuit boards, and the metal content contained therein is also different. At the same time, the degree of attention of waste circuit boards in different regions is different, and the price is different. Therefore, the size of its profits cannot be generalized.
Our PCB Recycling Machine has the following advantages:
1. Compact structure, reasonable layout, stable performance and low noise.
2. PLC-controlled automated production line, balance feeding.
3. Using three-stage pulverization, and the largest processing capacity reaches 1000kg per hour.
4. The crushing chamber adopts circulating water to control temperature and reduce noise.
5. The whole production line adopts negative pressure feeding to effectively reduce dust overflow.
PCB recycling machine has already become a leader in the e-waste processing industry, and has a considerable investment prospects. The metal recycled from waste circuit boards can be used as a raw material for the metallurgical industry, and the glass fiber can be used as a raw material or a filler for the glass fiber processing, thereby achieving the purpose of recycling all resources.
Email: [email protected]
FAQs
The metal contains about 20% copper, 8% iron, 2% nickel, 4% tin, 2% zinc, and precious metals such as about 0.1% gold, 0.2% silver, 0.005% palladium. The recycling price of the waste circuit boards varies according to the structure, generally ranging from $28-$2600.
Can you make money recycling circuit boards? ›
The worth of scrap circuit boards depends on the type and amount. Gold, copper and silver are precious metals found in them which can be recycled. Sort the circuit boards by type before recycling to get the highest price.
Is it worth it to scrap circuit boards? ›
The reason it's important to recycle computer scrap is because it contains several valuable materials, including gold, silver, copper, and palladium. These materials can be extracted and reused in new products, reducing the need to mine for new materials and decreasing the environmental impact of electronic waste.
Are old PCBs worth anything? ›
For PCBs that are beyond repair, extract valuable metals such as gold from the connectors or silver from other components. These can be sold to refineries or hobbyists. A gold-plated CPU processor, for example, contains a small amount of gold that can be recovered and reused.
Are old motherboards worth anything? ›
A motherboard is the main circuit board in a computer. It houses the CPU, RAM, and other important components. When you recycle a motherboard, you are essentially recycling all of these components at once. This makes motherboards one of the most valuable items to recycle.
Are old electronics worth scrapping? ›
It's true there's often silver, platinum, palladium and gold in our damaged or outmoded electronics, not to mention plastic, glass and other materials that have some scrap value. The primary reason is that precious metals conduct electricity much better than alloys.
What parts of a circuit board are worth money? ›
The most valuable parts of a circuit board are the components that make it up. This includes things like transistors, resistors, capacitors, and diodes. The metals used in the board itself – such as copper, gold, or silver – can also be quite valuable depending on their purity and amount.
Is there gold in TV circuit boards? ›
If you've opened an electronic device before, such as radios, televisions, or even your old cellphone, you've seen their inner workings. Ever noticed those shiny gold-colored parts on the circuit boards? Those bright pieces of metal are, in fact, gold.
What is the best way to recycle circuit boards? ›
Grind the components into small pieces. Separate the valuable metals from the non-metallic components. Refine the metals for new electronic products. Dispose of all remaining non-valuable materials.
How much gold is in old circuit boards? ›
printed circuit boards (PCBs) is that a rich gold ore might have 0.5 – 1.0 oz of gold per ton of ore, but computer PCBs contain 3 – 8+ oz gold, 15 – 20+ oz silver, 500+ lbs copper per ton of boards, plus multiple other base and precious metals.
The gold plated layer is widely used for component pads, connector shrapnel, as well as gold fingers and so on, The most widely used cell phone circuit boards are mostly gold-plated, however there are some electronic boards not plating the gold, such as gold-plated, computer motherboards, audio and small digital ...
Can you make money scrapping circuit boards? ›
The metal contains about 20% copper, 8% iron, 2% nickel, 4% tin, 2% zinc, and precious metals such as about 0.1% gold, 0.2% silver, 0.005% palladium. The recycling price of the waste circuit boards varies according to the structure, generally ranging from $28-$2600.
Do breakers have scrap value? ›
Some circuit breakers that are used can be reused, and we want to buy reusable circuit breakers as well. Most of the normal sized circuit breakers that we buy are only good for scrap value, we call them CBM (Copper Bearing Material).
How to extract gold from circuit boards? ›
Pour nitric acid into the glass container over the circuit boards. Stir the mixture with the glass or metal rod until the contents become a uniform fluid. Once the gold has separated from the plates — it may take some time — strain the nitric acid from the mix using the filter. Take out the pieces that aren't melted.
Which recycling is most profitable? ›
Scrap Metal. The final and most profitable material on our “best items to recycle for money” list is scrap metal.
Can you make money from recycling things? ›
One way to make money recycling is by collecting recyclable materials — such as plastic bottles, aluminum cans and paper — and selling them to recycling centers. Some states even offer cash incentives or redemption values for items like beverage containers, encouraging people to recycle.
