FAQs
The source could be Configuration Manager console, the destination is client, and we should open TCP Port 2701 on the side of client.
What ports are used for SCCM? ›
Generally speaking, we choose ports 8530(http) and 8531(https) or ports 80 and 443 to configure our sup role,both inbound and outbound rules not useful when firewall is off.
What port does remote control use? ›
When you connect to a computer (either a Windows client or Windows Server) through the Remote Desktop client, the Remote Desktop feature on your computer "hears" the connection request through a defined listening port (3389 by default). You can change that listening port on Windows computers by modifying the registry.
What ports are required for SCCM PXE boot firewall? ›
The PXE boot process
You must make sure that the DHCP (67 and 68), TFTP (69) and BINL (4011) ports are open between the client computer, the DHCP server and the PXE enabled DP. In the PXE boot process, the client must first acquire TCP/IP parameters and the location of the TFTP boot server.
What is port 139 and 445 used for? ›
Port 445 and port 139 are Windows ports. Port 139 is used for Network Basic Input Output System (NetBIOS) name resolution and port 445 is used for Server Message Blocks (SMB). They all serve Windows File and Printer Sharing.
What ports are needed for remote access? ›
Remote Desktop Protocol (RDP) is a Microsoft proprietary protocol that enables remote connections to other computers, typically over TCP port 3389.
How to check if SCCM ports are open? ›
This is a little tool I created for testing the required TCP ports on SCCM client systems. It will check that the required inbound ports are open and that the client can communicate to its management point, distribution point and software update point on the required ports.
Does SCCM use port 8005? ›
Express patching functionality in Microsoft System Center Configuration Manager (SCCM) uses port 8005, the Tomcat is not able to bind the port.
How to use SCCM remote control? ›
In the Configuration Manager console, choose Administration > Client Settings > Default Client Settings. On the Home tab, in the Properties group, choose Properties. In the Default dialog box, choose Remote Tools. Configure the remote control, Remote Assistance and Remote Desktop client settings.
Is Remote Desktop port 3389 or 443? ›
HTTPS protocol provides encryption between your computer and the remote desktop. It uses port 443, which transmits data through a Secure Sockets Layer (SSL) tunnel. This means that port 3389, the port used for Remote Desktop connections, is blocked to enhance network security.
Usage notes. The default port for Remote Desktop on Windows instances is 3389. For security reasons, you may want to change the default port for Remote Desktop to prevent attacks against and unauthorized scans of ECS instances by using Remote Desktop.
How do I set a remote port? ›
Windows 10
- Step 1: Open the Registry Editor. Run the regedit command. ...
- Step 2: Navigate to the Proper Folder. The Registry Editor will now open on your computer. ...
- Step 3: Enter a New Port Number. ...
- Step 4: Close Registry Editor and Restart. ...
- Step 5: Add an Inbound Rule in Windows Defender Firewall.
For example, for remote control here's the ports required per-microsoft:
- Port 135 - TCP.
- Port 3389 - TCP.
- Port 2701 - TCP/UDP.
- Port 2702 - TCP/UDP.
Firewall Ports Recommended and Required to Be Open
| Port | Protocol | Between |
|---|
| 445 | TCP/UDP | AD Servers |
| 49152 -65535 | TCP | AD Severs |
| 1025 -5000 | TCP | AD Severs |
| 88 | UDP | AD Servers |
25 more rowsWindows Remote Management uses the default listener port 5986 for HTTPS and SSL. Your WinRM listeners will typically use either of these ports, but your SCCM administrators can configure them for any port. Reach out to your SCCM administrators if port 5986 causes your connection tests to fail.
How do I access SCCM remotely? ›
To remotely administer a client computer from the Configuration Manager console
- In the Configuration Manager console, choose Assets and Compliance > Devices or Device Collections.
- Select the computer that you want to remotely administer and then, in the Home tab, in the Device group, choose Start > Remote Control.
Dynamic ports—Ports in the range 49152 to 65535 are not assigned, controlled, or registered. They are used for temporary or private ports. They are also known as private or non-reserved ports. Clients should choose ephemeral port numbers from this range, but many systems do not.
What is TCP port 4022 used for? ›
Port 4022/TCP: SQL Server service broker. Port 135/TCP: Used by the Transact-SQL debugger. Port 1434/UDP: Used by the SQL browser service. Listens for incoming connections.
