Debugging Approaches - Software Engineering - GeeksforGeeks (2024)

Table of Contents

What is Debugging? Need for debugging Challenges in Debugging Debugging Approaches 1. Brute Force Method 2. Backtracking 3. Cause Elimination Method 4. Program Slicing Debugging Guidelines Please Login to comment... Similar Reads Thank You!

Software Testing Course
Software Engineering Tutorial
Software Development Life Cycle
Waterfall Model
Software Requirements
Software Measurement and Metrics
Software Design Process
System configuration management
Software Maintenance
Software Development Tutorial
Software Testing Tutorial
Product Management Tutorial
Project Management Tutorial
Agile Methodology
Selenium Basics

Open In App

Last Updated : 07 Jan, 2024

Summarize

Comments

What is Debugging?

Debugging is the process of finding and resolving defects or problems within a computer program that prevent the correct operation of computer software or a system.

Need for debugging

Once errors are known during a program code, it’s necessary to initially establish the precise program statements liable for the errors and so to repair them.

Challenges in Debugging

There are a lot of problems at the same time as acting the debugging. These are the following:

Debugging is finished through the individual that evolved the software program and it’s miles difficult for that person to acknowledge that an error was made.
Debugging is typically performed under a tremendous amount of pressure to fix the supported error as quick as possible.
It can be difficult to accurately reproduce input conditions.
Compared to the alternative software program improvement activities, relatively little research, literature, and formal preparation exist in the procedure of debugging.

Debugging Approaches

The following are a number of approaches popularly adopted by programmers for debugging.

1. Brute Force Method

This is the foremost common technique of debugging however is that the least economical method. during this approach, the program is loaded with print statements to print the intermediate values with the hope that a number of the written values can facilitate to spot the statement in error. This approach becomes a lot of systematic with the utilisation of a symbolic program (also known as a source code debugger), as a result of values of various variables will be simply checked and breakpoints and watch-points can be easily set to check the values of variables effortlessly.

2. Backtracking

This is additionally a reasonably common approach. during this approach, starting from the statement at which an error symptom has been discovered, the source code is derived backward till the error is discovered. sadly, because the variety of supply lines to be derived back will increase, the quantity of potential backward methods will increase and should become unimaginably large so limiting the utilisation of this approach.

3. Cause Elimination Method

In this approach, a listing of causes that may presumably have contributed to the error symptom is developed and tests are conducted to eliminate every error. A connected technique of identification of the error from the error symptom is that the package fault tree analysis.

4. Program Slicing

This technique is analogous to backtracking. Here the search house is reduced by process slices. A slice of a program for a specific variable at a particular statement is that the set of supply lines preceding this statement which will influence the worth of that variable.

Debugging Guidelines

Debugging is commonly administrated by programmers supported their ingenuity. The subsequent are some general tips for effective debugging:

Many times debugging needs an intensive understanding of the program style. making an attempt to rectify supported a partial understanding of the system style and implementation might need an excessive quantity of effort to be placed into debugging even straightforward issues.
Debugging might generally even need a full plan of the system. In such cases, a typical mistake that novice programmers usually create is trying to not fix the error however its symptoms.
One should be watched out for the likelihood that a slip correction might introduce new errors. so when each spherical of error-fixing, regression testing should be administrated.

Stranger1

Improve

What is Debugging in Software Engineering?

Please Login to comment...

Similar Reads

Activity Identification approaches in Software Engineering In software engineering, we mostly have very complex and big scale projects to deal with. These complex and big scale projects are divided into simpler, manageable, independent and small tasks which are called as activities. There are 3 most common approaches or methods for the identification of activities in any software project: Activity based ap 4 min read What is Debugging in Software Engineering? Debugging in Software Engineering is the process of identifying and resolving errors or bugs in a software system. It's a critical aspect of software development, ensuring quality, performance, and user satisfaction. Despite being time-consuming, effective debugging is essential for reliable and competitive software products. Here are we discussing 11 min read Prototyping Approaches in Software Process The prototyping approaches in software process are as follows- [1]. Evolutionary Prototyping : This prototype approach is based on the idea of developing an initial implementation, exposing user commentary, and going through several stages until a sufficient system has been developed as shown in figure. The advantages to adopting this approach to s 2 min read Approaches for Test Data Generation in Software Testing Prerequisite: Software Testing | Basics As a tester, you needn't only to test the software product but also have to manage, collect, and maintain a large volume of data sets in order to efficiently test all the major test-cases, to ensure that all the requirements are fulfilling as maximum as possible no matter whether it is functional or non-funct 4 min read Introduction to Software Engineering - Software Engineering Software is a program or set of programs containing instructions that provide the desired functionality. Engineering is the process of designing and building something that serves a particular purpose and finds a cost-effective solution to problems. Table of Content What is Software Engineering?Key Principles of Software EngineeringMain Attributes 9 min read Various Approaches of Partitioning If the system is having hierarchical architecture, the program structure can easily be partitioned both horizontally and vertically, figure (a), represents this view. In given figure (a), horizontal division defines the individual branches of the modular hierarchy for every major program function. Control modular (shown by rectangles) are used to c 2 min read Various Approaches to Functional Testing Functional testing is a process of quality assurance of a product in which quality is checked and maintained. This testing is generally performed to check and verify proper functioning of software applications i.e., to check whether software application performs and functions correctly in a proper way according to design specifications. During test 3 min read Basic approaches for Data generalization (DWDM) Data Generalization is the process of summarizing data by replacing relatively low level values with higher level concepts. It is a form of descriptive data mining. There are two basic approaches of data generalization : 1. Data cube approach : It is also known as OLAP approach. It is an efficient approach as it is helpful to make the past selling 2 min read Types of RCM Approaches Introduction : RCM (Reliability-Centered Maintenance) is a maintenance strategy that aims to improve the reliability and maintainability of physical assets in an organization. Reliability Centered Maintenance (RCM) is a process that is used for determining overall maintenance in a system so that it can operate effectively in terms of cost, function 5 min read Reverse Engineering - Software Engineering Software Reverse Engineering is a process of recovering the design, requirement specifications, and functions of a product from an analysis of its code. It builds a program database and generates information from this.This article focuses on discussing reverse engineering in detail. What is Reverse Engineering?Reverse engineering can extract desig 6 min read Difference between Software Engineering process and Conventional Engineering Process Software Engineering Process and Conventional Engineering Process, both are processes related to computers and development. In this article, we will see the similarities as well as differences between both, that is Software Engineering Process and the Conventional Engineering Process. Table of Content Software Engineering ProcessConventional Engine 4 min read Re-engineering - Software Engineering Software Re-engineering is a process of software development that is done to improve the maintainability of a software system. Re-engineering is the examination and alteration of a system to reconstitute it in a new form. This process encompasses a combination of sub-processes like reverse engineering, forward engineering, reconstructing, etc. Tab 8 min read Difference between Software Engineering and Computer Engineering Software engineering and Computer engineering are two distinct disciplines that focus on different aspects of computer systems. While both fields require a strong foundation in computer science and mathematics, software engineering is focused on software development processes, while computer engineering is focused on the physical components and sys 6 min read Evolution of Software Engineering: From an Art To Engineering Discipline Software Engineering is a systematic and cost-effective technique for software development. It is an engineering approach to developing software. For example: If someone wants to travel from Punjab to Delhi. There are two approaches one can follow to achieve the same result: The normal approach is to go out and catch the bus/train that is available 13 min read Requirements Engineering Process in Software Engineering Requirements Engineering is the process of identifying, eliciting, analyzing, specifying, validating, and managing the needs and expectations of stakeholders for a software system. Table of Content What is Requirements Engineering?Requirements Engineering ProcessTools Involved in Requirement EngineeringAdvantages of Requirements Engineering Process 13 min read Differences between Testing and Debugging Testing and Debugging are important processes in software engineering. Testing and Debugging seems to be similar but they are quite different. The main difference between Testing and Debugging are testing is the process of identifying defects or errors in the software system while debugging is the process to to fix those defects or errors that affe 4 min read Difference between Forward Engineering and Reverse Engineering Forward engineering and reverse engineering are two approaches to software development, with different goals and processes. Forward engineering involves creating new software systems from scratch using given requirements and design specifications. It focuses on building new applications through a structured process of analysis, design, implementati 6 min read Software Engineering | Schick-Wolverton software reliability model Prerequisite - Jelinski Moranda software reliability model The Schick-Wolverton (S-W) model is a modification to the J-M model. It is similar to the J-M model except that it further assumes that the failure rate at the ith time interval increases with time ti since the last debugging. In the model, the program failure rate function between the (i-1 4 min read Software Engineering | Responsibilities of Software Project Manager Software Project Management (SPM) is a sub-field of Project Management in which software projects are planned, implemented, monitored and controlled. It consists of three terms: Software, Project and Management. So, let us understand each term separately. Software includes a set of programs, documentation and user manual for a particular software p 3 min read Software Engineering - Hardware Reliability vs Software Reliability Reliability in software is software that has no failure and works in a special time period with a special environment. Hardware reliability is the probability of the absence of any hardware-related system malfunction for a given mission on the other hand software reliability is the probability that the software will provide a failure-free operation 3 min read Failure Curve for Software in Software Engineering Pre-requisites: Software Engineering In Software Engineering, the concept of a software failure curve is part of the hardware bathtub curve. According to the diagram, the failure rate is a function of time for Hardware. This curve shows that hardware exhibits a relatively high failure rate early in its life (these failures are often design or manuf 4 min read Identifying Software Development Metrics - Software Engineering Companies invest a fair proportion of their resources in the expensive staff that drive the development of technology on which an organization runs. It is therefore imperative to explore and quantitatively measure the performance of such investments by empowering teams with the ability to track their efficiency. This task is delegated to a designat 4 min read Software Business and Development - Software Engineering Software Business means selling software for the business or sometimes it is referred to as selling information about various software made for business purposes that are so-called business software. This article focuses on discussing Software Business and Development in detail. What is a Software Business? Software business is one of the commercia 3 min read Software Quality Framework - Software Engineering Software Quality Framework is a model for software quality that ensures quality by connecting and integrating the different views of software quality. This article focuses on discussing the Software Quality Framework. What is a Software Quality Framework?Software Quality Framework connects the customer view with the developer's view of software qua 4 min read Software Evolution - Software Engineering Software Evolution is a term that refers to the process of developing software initially, and then timely updating it for various reasons, i.e., to add new features or to remove obsolete functionalities, etc. This article focuses on discussing Software Evolution in detail. What is Software Evolution?The software evolution process includes fundament 3 min read Characteristics of Good Software - Software Engineering Software is treated as good software using different factors. A software product is concluded as good software by what it offers and how well it can be used. The factors that decide the software properties are divided into three categories: Operational, Transitional, and Maintenance. What is a Good Software?Software engineering is the process of de 2 min read Software Quality Assurance (SQA) Set 2 - Software Engineering Software Quality Assurance (SQA) consists of a set of activities that monitor the software engineering processes and methods used to ensure quality. Software Quality Assurance (SQA) EncompassesA quality management approach. Effective software engineering technology (methods and tools). Some formal technical reviews are applied throughout the softwa 3 min read Software Project Management Plan (SPMP) - Software Engineering Once project designing is complete, project managers document their plans during a software package Project Management setup (SPMP) document. The SPMP document ought to discuss an inventory of various things that are mentioned below. This list will be used as a doable organization of the SPMP document. Organization of the software package Project M 1 min read Changing Nature of Software - Software Engineering The software is an instruction or computer program that when executed provides desired features, function, and performance. A data structure that enables the program to adequately manipulate information and documents that describe the operation and use of the program. Characteristics of software: There is some characteristic of software which is gi 3 min read Software Review - Software Engineering Software Review is a systematic inspection of software by one or more individuals who work together to find and resolve errors and defects in the software during the early stages of the Software Development Life Cycle (SDLC). A software review is an essential part of the Software Development Life Cycle (SDLC) that helps software engineers in valida 3 min read

Article Tags :

Software Engineering

Trending in News

iOS 18 Is Out Now: Best New Features and How to Install iOS 18
How to Watch NFL Games Live Streams Free
10 Best PrimeWire Alternatives (2024)

We use cookies to ensure you have the best browsing experience on our website. By using our site, you acknowledge that you have read and understood our Cookie Policy & Privacy Policy

'); $('.spinner-loading-overlay').show(); jQuery.ajax({ url: writeApiUrl + 'create-improvement-post/?v=1', type: "POST", contentType: 'application/json; charset=utf-8', dataType: 'json', xhrFields: { withCredentials: true }, data: JSON.stringify({ gfg_id: post_id, }), success:function(result) { $('.spinner-loading-overlay:eq(0)').remove(); $('.improve-modal--overlay').hide(); $('.unlocked-status--improve-modal-content').css("display","none"); $('.create-improvement-redirection-to-write').attr('href',writeUrl + 'improve-post/' + `${result.id}` + '/', '_blank'); $('.create-improvement-redirection-to-write')[0].click(); }, error:function(e) { $('.spinner-loading-overlay:eq(0)').remove(); var result = e.responseJSON; if(result.detail.non_field_errors.length){ $('.improve-modal--improve-content .improve-modal--improve-content-modified').text(`${result.detail.non_field_errors}.`); jQuery('.improve-modal--overlay').show(); jQuery('.improve-modal--improvement').show(); $('.locked-status--impove-modal').css("display","block"); $('.unlocked-status--improve-modal-content').css("display","none"); $('.improve-modal--improvement').attr("status","locked"); $('.improvement-reason-modal').hide(); } }, }); return; } var improvement_reason_html = ""; for(var comment of commentArray) { // loop creating improvement reason list markup var comment_id = comment['id']; var comment_text = comment['suggestion']; improvement_reason_html += `

${comment_text}

`; } $('.improvement-reasons_wrapper').html(improvement_reason_html); $('.improvement-bottom-btn').html("Create Improvement"); $('.improve-modal--improvement').hide(); $('.improvement-reason-modal').show(); }, error: function(e){ $('.spinner-loading-overlay:eq(0)').remove(); // stop loader when ajax failed; }, }); }, error:function(e) { $('.spinner-loading-overlay:eq(0)').remove(); var result = e.responseJSON; if(result.detail.non_field_errors.length){ $('.improve-modal--improve-content .improve-modal--improve-content-modified').text(`${result.detail.non_field_errors}.`); jQuery('.improve-modal--overlay').show(); jQuery('.improve-modal--improvement').show(); $('.locked-status--impove-modal').css("display","block"); $('.unlocked-status--improve-modal-content').css("display","none"); $('.improve-modal--improvement').attr("status","locked"); $('.improvement-reason-modal').hide(); } }, }); } else { if(loginData && !loginData.isLoggedIn) { $('.improve-modal--overlay').hide(); if ($('.header-main__wrapper').find('.header-main__signup.login-modal-btn').length) { $('.header-main__wrapper').find('.header-main__signup.login-modal-btn').click(); } return; } } }); $('.left-arrow-icon_wrapper').on('click',function(){ if($('.improve-modal--suggestion').is(":visible")) $('.improve-modal--suggestion').hide(); else{ $('.improvement-reason-modal').hide(); } $('.improve-modal--improvement').show(); }); function loadScript(src, callback) { var script = document.createElement('script'); script.src = src; script.onload = callback; document.head.appendChild(script); } function suggestionCall() { var suggest_val = $.trim($("#suggestion-section-textarea").val()); var array_String= suggest_val.split(" ") var gCaptchaToken = $("#g-recaptcha-response-suggestion-form").val(); var error_msg = false; if(suggest_val != "" && array_String.length >=4){ if(suggest_val.length <= 2000){ var payload = { "gfg_post_id" : `${post_id}`, "suggestion" : `

${suggest_val}

`, } if(!loginData || !loginData.isLoggedIn) // User is not logged in payload["g-recaptcha-token"] = gCaptchaToken jQuery.ajax({ type:'post', url: "https://apiwrite.geeksforgeeks.org/suggestions/auth/create/", xhrFields: { withCredentials: true }, crossDomain: true, contentType:'application/json', data: JSON.stringify(payload), success:function(data) { jQuery('.spinner-loading-overlay:eq(0)').remove(); jQuery('#suggestion-section-textarea').val(""); jQuery('.suggest-bottom-btn').css("display","none"); // Update the modal content const modalSection = document.querySelector('.suggestion-modal-section'); modalSection.innerHTML = `

Thank You!

Your suggestions are valuable to us.

You can now also contribute to the GeeksforGeeks community by creating improvement and help your fellow geeks.

`; }, error:function(data) { jQuery('.spinner-loading-overlay:eq(0)').remove(); jQuery('#suggestion-modal-alert').html("Something went wrong."); jQuery('#suggestion-modal-alert').show(); error_msg = true; } }); } else{ jQuery('.spinner-loading-overlay:eq(0)').remove(); jQuery('#suggestion-modal-alert').html("Minimum 5 Words and Maximum Character limit is 2000."); jQuery('#suggestion-modal-alert').show(); jQuery('#suggestion-section-textarea').focus(); error_msg = true; } } else{ jQuery('.spinner-loading-overlay:eq(0)').remove(); jQuery('#suggestion-modal-alert').html("Enter atleast four words !"); jQuery('#suggestion-modal-alert').show(); jQuery('#suggestion-section-textarea').focus(); error_msg = true; } if(error_msg){ setTimeout(() => { jQuery('#suggestion-section-textarea').focus(); jQuery('#suggestion-modal-alert').hide(); }, 3000); } } document.querySelector('.suggest-bottom-btn').addEventListener('click', function(){ jQuery('body').append('

'); jQuery('.spinner-loading-overlay').show(); if(loginData && loginData.isLoggedIn) { suggestionCall(); return; } // load the captcha script and set the token loadScript('https://www.google.com/recaptcha/api.js?render=6LdMFNUZAAAAAIuRtzg0piOT-qXCbDF-iQiUi9KY',[], function() { setGoogleRecaptcha(); }); }); $('.improvement-bottom-btn.create-improvement-btn').click(function() { //create improvement button is clicked $('body').append('

'); $('.spinner-loading-overlay').show(); // send this option via create-improvement-post api jQuery.ajax({ url: writeApiUrl + 'create-improvement-post/?v=1', type: "POST", contentType: 'application/json; charset=utf-8', dataType: 'json', xhrFields: { withCredentials: true }, data: JSON.stringify({ gfg_id: post_id }), success:function(result) { $('.spinner-loading-overlay:eq(0)').remove(); $('.improve-modal--overlay').hide(); $('.improvement-reason-modal').hide(); $('.create-improvement-redirection-to-write').attr('href',writeUrl + 'improve-post/' + `${result.id}` + '/', '_blank'); $('.create-improvement-redirection-to-write')[0].click(); }, error:function(e) { $('.spinner-loading-overlay:eq(0)').remove(); var result = e.responseJSON; if(result.detail.non_field_errors.length){ $('.improve-modal--improve-content .improve-modal--improve-content-modified').text(`${result.detail.non_field_errors}.`); jQuery('.improve-modal--overlay').show(); jQuery('.improve-modal--improvement').show(); $('.locked-status--impove-modal').css("display","block"); $('.unlocked-status--improve-modal-content').css("display","none"); $('.improve-modal--improvement').attr("status","locked"); $('.improvement-reason-modal').hide(); } }, }); });